Windows PE (WinPE) Free Download for Windows 7/8/10

StartIsBack returns Windows 10 and Windows 8 a real fully featured start menu and start button, behaving exactly like the ones in Windows 7. This is disk for Windows 10 and 8 PE allows the users to maintain the computer and provides hard disk and partition management as well as. For the onscreen tutorial to complete the process. Steps to Create Windows Bootable USB on Windows 8/7: Step 1. Download Windows 8 or Windows 7 ISO file. Don'.

Windows PE (WinPE) Free Download for Windows 7/8/10 -

The 5 Best Rescue & Recovery Disks for Windows System Restore

At times, Windows is an unruly operating system. Random crashes, boot failures, error messages, and full blue screen of death system crashes are part and parcel of Windows life.

If that sounds like your life, you must learn about some amazing Windows 10 rescue and recovery disks. These rescue disks have saved more than a few Windows user's bacon on many occasions. Check out the Windows 10 rescue and recovery disks below—it could be the difference between a self-fix or a costly trip to the computer repair store.

1. Hiren's BootCD PE x64

Hiren's BootCD remains one of the single best Windows rescue and restore disks. Any IT technician or habitual technology tinkerer will have come across Hiren's BootCD. If they have, they'll sing its praises. However, the original Hiren's BootCD ceased official updates in November 2012. Now, a trusty band of Hiren's BootCD fans updates the rescue disk with the latest and greatest recovery utilities.

Hiren's BootCD focuses on fixing Windows systems. The rescue disk contains a wealth of utilities, including malware and rootkit detection, antivirus scanning, temporary file cleaners, data and driver backups, hardware scanning, partition scanning, imaging and saving, and even password crackers. You can also use Hiren's BootCD to reflash your BIOS or wipe your CMOS if required.

Furthermore, Hiren's BootCD is now based in the Windows 10 Preinstallation Environment (PE) to roll with the times. A PE is a lightweight version of the operating system primarily used for troubleshooting and is usually accompanied by additional recovery and rescue tools.

Need an old Hiren's BootCD version? Use the drop-down menu to select the version you want.

2. Kyhi's Recovery Drive

Kyhi's Recovery Drive, also known by the cumbersome name of Windows 10 Recovery Tools—Bootable PE Rescue Disk, is a custom Windows 10 PE environment. In this case, TenForum's user, Kyhi, has developed a Windows 10 PE environment filled with system restore and recovery tools.

Kyhi's Recovery Drive comes with a huge range of tools for virus and malware removal, disk repairs, partition managers and scanners, networking, remote view and VNC tools, image backup and recovery tools, and much more.

Better still, many users will find Kyhi's Recovery Drive extremely easy to use due to the familiar environment. The recovery environment looks exactly like a Windows 10 installation, so navigation and access are just as you would expect.

The above image showcases just some of the array of Windows 10 recovery tools found in Kyhi's Recovery Drive.

Related: Bootable Windows PE-Based Recovery Discs That'll Save Your System

3. The Ultimate Boot CD

Like Hiren's BootCD, UBCD troubleshoots Windows and Linux systems with a massive range of helpful utilities. It is useful against issues up and down the system error board with drive cloning and data recovering tools, hardware testing, partition scanning, and a host of other system repair tools.

UBCD aims to "consolidate as many diagnostic tools as possible into one bootable CD"—something the makers have come very close to achieving.

UBCD is completely free for download, so be wary of any site attempting to take payment for a download.

4. Knoppix

You cannot have a bacon-saving recovery disk list without including the grandfather of them all: Knoppix. This Linux Live CD provides a fully functional operating system once loaded onto a malfunctioning system, rather than just providing you a GUI with different system analysis options.

The Knoppix operating system comes with some 1,000 software packages for you to scan through, including troubleshooting, hardware analysis, data recovery, and cloning tools alongside browsers, image-manipulation tools, and media players.

There DVD version of Knoppix is known as "Maxi," bundling over 2,600 different pieces of software in a 4.7GB package. Most of the software included in both Knoppix packages are either free or open-source though there are some proprietary software packages.

5. Native Windows Recovery Disk

The final recovery disk is the Windows Recovery Disk. If you have a recovery disk, there is always a chance you can repair your Windows installation.

Unsure how to create a Windows recovery disk? Here's how to create Windows 10 installation media. When trouble arises, pop your installation media into your system and select the Repair mode when it appears.

Alternative Windows Rescue Disks

There is a huge amount of Windows rescue disks out there. Here are three few more for you to peruse.

The Trinity Rescue Kit

The Trinity Rescue Kit is specifically designed with common Windows and Linux issues in mind. Creator, Tom Kerremans, authored the Live CD to revitalize ailing systems using a range of virus and malware scanners, password recovery tools, partition recovery tools, and drive cloning utilities.

TRK doesn't have the massive range of HBCD or UBCD but is still extremely useful to have a copy of. Best of all, like many of the other resources on this list, it's completely free, so grab a copy.

DriveDroid

While not strictly a bootable disk, DriveDroid for Android is a ridiculously useful system restore tool to keep in your pocket. Those Android users with a rooted device can use DriveDroid's massive selection of Linux distros, both big and small, in an app that boots as a USB drive.

Handy for pocket-based recovery without optical media or USB drives, or if you just like carrying a massive amount of Linux distros around ready for deployment at any moment.

Note:Your Android device must have root access for DriveDroid to work.

SystemRescueCD

…It does exactly what it says on the disk…

But seriously, it does. SystemRescueCD is a Linux-based rescue disk designed to troubleshoot damaged Windows and Linux-based systems. It comes packed with antivirus, antimalware, rootkit tools, partition management, and cloning, which are handy for network troubleshooting and diagnostics. The CD also includes a handy disc burner, so you can continue to burn while SystemRescueCD does its thing.

It can be used as a bootable disk or USB and, like all the best things in life, is completely free. Many IT technicians reach for SystemRescueCD following a system crash, and we understand why. Another must-have for your CD stack.#

Related: How to Combine Multiple ISO Files Into a Single Bootable ISO Image

Always Keep a Windows Rescue Disk at Hand

One of the disks on this list is guaranteed to save your system in the future. And if not yours, it will come in handy when you play IT specialist for your family and friends.

How to Make Your Own Windows PE Rescue Disc (And Keep Your PC Safe)

There are several excellent Windows PE-based rescue discs. Create your own custom Windows PE rescue disc for peace of mind!

Read Next

ShareTweetEmail

About The Author
Gavin Phillips (988 Articles Published)

Gavin is the Junior Editor for Windows and Technology Explained, a regular contributor to the Really Useful Podcast, and a regular product reviewer. He has a BA (Hons) Contemporary Writing with Digital Art Practices pillaged from the hills of Devon, as well as over a decade of professional writing experience. He enjoys copious amounts of tea, board games, and football.

More From Gavin Phillips

Subscribe to our newsletter

Join our newsletter for tech tips, reviews, free ebooks, and exclusive deals!

Click here to subscribe

Источник: https://www.makeuseof.com/tag/5-best-rescue-disks-windows-system-restore/

Bootable Windows USB Drive: Guide for Windows XP, Vista, 7, 8, 8.1, 10

This guide explains how to create a Windows bootable USB drive for the following Windows versions: Windows XP, Windows Vista, Windows 7, Windows 8, Windows 8.1 and Windows 10.

Creating a bootable USB drive will allow you to install Windows from the USB drive directly.

To be able to install Windows from a USB, you need have one of the following:

  • the ISO image of the Windows version
  • or the original installation disc of the Windows version

Contents

Prerequisites

Before you start creating a bootable USB flash drive to install Windows (XP, Vista, 7, 8, 8.1, 10), you need to make sure that:

  • The USB drive is empty and properly formatted
  • The USB drive is bootable
  • Your BIOS/UEFI is properly configured to boot from the USB flash drive first
  • You have the ISO image of Windows XP, Vista, 7, 8 or 8.1. If you have the original Windows installation disc, you can use that instead of the ISO image.
  • Software needed to write the ISO image to the USB drive or alternatives, such as Easy USB Creator 2.0 by NeoSmart or the Windows 7 USB/DVD Download Tool by Microsoft.

USB Drive

The USB drive you want to make bootable should have at least 4 GB in available size.

BIOS/UEFI configuration

To make sure that your BIOS/UEFI is configured to boot from a USB drive, follow our Boot from USB drive guide. You need to make sure that:

If a Boot Device menu doesn’t appear on your screen where the USB drive is plugged-in, check the BIOS/UEFI settings. A Boot Device menu can look like this, depending on your computer model and Windows version:

If you are using a new computer with UEFI/EFI, make sure that the Boot Legacy option is enabled:

If you’re using a computer with Fast Boot option, make sure that Fast Boot is disabled.

If your BIOS menu doesn’t list a USB item in the BIOS settings, it may mean that it can’t boot from a USB drive. You can try with the USB drive plugged-in and then boot into BIOS directly.

If the item doesn’t appear, you need to use the original Windows installation CD or DVD to install Windows or access the repair tools.

If you need to use the repair tools of an original Windows installation CD/DVD, you can also use Easy Recovery Essentials and run Automated Repair to automatically find and fix boot errors.

Download Easy Recovery Essentials

ISO image

If you don’t have the ISO image to create the bootable USB drive, you can download an official image from Microsoft’s website.

You need to have the product (or license) key.

Create a Windows XP bootable USB

You can create a bootable USB drive with Windows XP by following these instructions.

Using Easy USB Creator 2.0

Easy USB Creator can quickly convert the ISO images into bootable USB drives, with just a single click:

Easy USB Creator 2.0 screenshot

Download Easy USB Creator 2.0

To burn Windows XP to a USB drive using Easy USB Creator 2.0, simply follow these steps:

  1. Download USB Creator 2.0
  2. Install Easy USB Creator 2.0
  3. Browse the Windows XP ISO Image to load at the ISO File field
  4. Select the destination of your USB Drive at the Destination Drive field
  5. Start

Easy USB Creator 2.0 supports both USB 2.0 and USB 3.0.

It’s compatible with Windows XP, Windows Vista, Windows 7, Windows 8, Windows 8.1, Windows 10 plus the Windows Server editions (2003, 2008, 2012). You must have .NET Framework 2.0 or higher in order to use Easy USB Creator 2.0

If you have the installation disc (CD)

If you have the original Microsoft Windows XP Professional installation CD, you can use the CD to create a bootable USB using PE Builder.

It’s important to have the following before you start:

To create the bootable drive with Windows XP, follow these steps:

    1. Boot into the system
    2. Download the PE Builder software from http://www.nu2.nu/pebuilder/
    3. Install the PE Builder to . The final path should be to make the next steps easier.

Inside the PEBuilder folder, create a new folder named . This folder’s path should be .

  • Download the Windows Server 2003 SP1 archive from http://www.microsoft.com/en-us/download/details.aspx?id=1143…
  • Rename the archive downloaded from Microsoft to
  • Open Command Prompt. You can also open it by typing in the Run dialog box and pressing afterwards.
  • Type the command to go to the folder where the MS-WS-SP1.exe file exists: cd c:\downloads

    Don’t type MS-WS-SP1.exe in the path above. You only need to go to the folder where the file exists.

    Replace with the letter of the drive and the directory where the MS-WP-SP1.exe file exists.

  • Type to begin the extraction process, press
  • Choose to extract the files to the same folder, e.g. :
    PEBuilder: Extract Files

    PEBuilder: Extract Files

  • In Command Prompt, you now need to go to the extract folder at the i386 sub-folder.To do so, type the same command, if you’re still at the c:\downloads folder in Command Prompt and you haven’t created a new folder for the extracted files: cd i386

    If you created a new folder for the extract files, say Extract, in c:\downloads, update the cd command to go to that folder:

    cd c:\downloads\Extract

    Then, type , press

  • Once inside the i386 folder via Command Prompt, type: copy setupldr.bin c:\PEBuilder\SRSP1

    Replace with the path where the PE Builder software is installed, if this was changed in previous steps.

  • While still in Command Prompt, expand the ramdisk.sys file with this command: expand -r ramdisk.sy_ c:\PEBuilder\SRSP1

    Replace with the path where the PE Builder software is installed, if this was changed in previous steps.

  • Go to My Computer
  • Go to PEBuilder folder
  • Go to SRSP1 folder
  • Check that you have the 2 files listed there: setupldr.bin and ramdisk.sys
    PEBuilder: Check that you have the files copied

    PEBuilder: Check that you have the files copied

  • Insert the Windows XP Professional CD in the disk tray
  • Launch PE Builder
  • Make the following changes before you click Build:
    BartPE: Configuration for Windows XP USB

    BartPE: Configuration for Windows XP USB

    • At the Source field, type the letter of the drive for the Windows XP CD, e.g. e:\
    • At the Output field, type BartPE
    • Leave the Custom field blank
    • Media output should be None
  • Click Build
  • When the build process is complete, click Close
  • Go to Command Prompt and then go to the PEBuilder folder by typing the command: cd c:\PEBuilder
  • Type this command (make sure the USB flash drive is not removed) and press : pe2usb -f d:

    Replace with the letter of the drive where your USB flash drive is loaded.

  • Type , when prompted to begin the process. Press after typing YES.
  • Press any key to exit the pe2usb process, after the process is complete
  • Safely remove the USB flash drive from the port
  • Remove the Windows XP CD from the disk try
  • Reboot the system to check if the USB flash drive is now bootable with Windows XP Professional

 

If your computer doesn’t boot into the USB drive directly, go to Prerequisites > BIOS/UEFI configuration or read the Boot from USB drive guide to configure your BIOS menu to boot from a USB device first.

Create a Windows Vista bootable USB

Depending if you have the ISO image of Windows Vista or the original DVD, you can use Easy USB Creator 2.0 or the diskpart utility to create the bootable USB.

If you have the ISO image

Using Easy USB Creator 2.0

Easy USB Creator can quickly convert the ISO images into bootable USB drives, with just a single click:

Easy USB Creator 2.0 screenshot

Download Easy USB Creator 2.0

To burn Windows Vista to a USB drive using Easy USB Creator 2.0, simply follow these steps:

  1. Download USB Creator 2.0
  2. Install Easy USB Creator 2.0
  3. Browse the Windows Vista ISO Image to load at the ISO File field
  4. Select the destination of your USB Drive at the Destination Drive field
  5. Start

Easy USB Creator 2.0 supports both USB 2.0 and USB 3.0.

It’s compatible with Windows XP, Windows Vista, Windows 7, Windows 8, Windows 8.1, Windows 10 plus the Windows Server editions (2003, 2008, 2012). You must have .NET Framework 2.0 or higher in order to use Easy USB Creator 2.0

Using Windows 7 USB/DVD Download Tool

To create the bootable drive with the Windows 7 USB/DVD Download Tool, follow the steps from Using the Windows 7 USB/DVD Download Tool from Windows 8/8.1.

While the name is “Windows 7”, you can use the tool for Windows Vista systems too.

If you have the installation disc (DVD)

To create a bootable USB with Windows Vista and install the operating system from that USB drive, follow the steps.

You’ll be using the diskpart utility, available in Windows Vista, to make the USB drive bootable. You’ll copy the files from the installation disc (DVD) to the USB drive after the diskpart utility process is finished.

The instructions are:

  1. Boot your computer
  2. Open Command Prompt and run it as Administrator.You can go at Start > All Programs Accessories > Command Prompt or type in the search field.To run Command Prompt as Administrator, right-click on the Command Prompt item and select Run as Administrator.
  3. When Command Prompt opens, type this command and press : cd c:\windows\system32

    Replace with the letter of the driver where your Windows Vista is installed: C:\, D:\ etc.

  4. Insert the USB flash drive in the USB port
  5. Type: diskpart
  6. Press
  7. Type: list disk
  8. Press
  9. After you press Enter for the list disk command, Command Prompt will list the drives that are connected to your computer. Find the USB drive and its corresponding number.
    Command Prompt: list disk

    Command Prompt: list disk

  10. Then, type this command: select disk X

    Where is the number of the USB flash drive listed by Command Prompt.

    The confirmation message should be:

    Disk 1 is now the selected disk.
  11. Press
  12. Type and press
  13. Type and press
  14. Type and press
  15. Type and press
  16. Type this command and press afterwards: format fs=ntfs

    It may take a few minutes to format the entire USB flash drive, depending on its size. However, you can use the quick parameter to format the drive more quickly:

    format fs=ntfs quick
  17. Type , press
  18. Type , press
  19. Insert the Windows Vista DVD in the optical drive
  20. Go to My Computer
  21. Note the letter of the drive where the Windows Vista DVD is loaded, e.g. D:\, E:\
  22. Go back to Command Prompt and check if the USB flash drive has been formatted
  23. When the format process is complete, type this command and press : d: cd boot

    Replace with the letter of the drive where the Windows Vista DVD is loaded

  24. Then type and press
  25. Type this command and press : bootsect.exe /nt60 f:

    Where is the letter of the drive where your USB flash drive is loaded

  26. Copy all files from the Windows Vista DVD on the USB flash drive.To open the contents of the DVD (and not load the splash screen of the Windows Vista DVD), right-click on the drive and click Open.

If you followed the above instructions correctly, the USB flash drive should now be bootable with Windows Vista.

You can check this by plugging the USB and rebooting the system. To make sure that your computer boots from a USB drive first, and not from the hard disk, go to BIOS/UEFI configuration.

Create a Windows 7 bootable USB

You can create the bootable USB drive with Windows 7, if:

  • you have the ISO image of Windows 7
  • or you have the original installation DVD of Windows 7

If you have the ISO image

Using Easy USB Creator 2.0

Easy USB Creator can quickly convert the ISO images into bootable USB drives, with just a single click:

Easy USB Creator 2.0 screenshot

Download Easy USB Creator 2.0

To burn Windows 7 to a USB drive using Easy USB Creator 2.0, simply follow these steps:

  1. Download USB Creator 2.0
  2. Install Easy USB Creator 2.0
  3. Browse the Windows 7 ISO Image to load at the ISO File field
  4. Select the destination of your USB Drive at the Destination Drive field
  5. Start

Easy USB Creator 2.0 supports both USB 2.0 and USB 3.0.

It’s compatible with Windows XP, Windows Vista, Windows 7, Windows 8, Windows 8.1, Windows 10 plus the Windows Server editions (2003, 2008, 2012). You must have .NET Framework 2.0 or higher in order to use Easy USB Creator 2.0

Using Windows 7 USB/DVD Download Tool

The Windows 7 USB/DVD Download Tool is available to download and you can use it to create a bootable ISO image from the ISO image you purchased and downloaded from Microsoft.

Before you continue with these instructions, please make sure that:

The instructions are:

  1. Download Windows 7 USB/DVD Download Tool from http://wudt.codeplex.com/ and launch it
  2. At the Source File field, click Browse and find the Windows 7 ISO image on your computer and load it
    Windows 7 USB/DVD Download Tool: Source File

    Windows 7 USB/DVD Download Tool: Source File

  3. Click Next
  4. Select USB Device
  5. Select the USB flash drive from the drop down menu
  6. Click Begin copying
  7. Exit the application, when the process is complete

If you have the installation disc (DVD)

You can use a USB flash drive (see Prerequisites for more information) to install Windows 7 from.

To do so, you need to make the USB flash drive bootable first and then use the original Windows 7 installation disc (DVD) to copy the contents of the DVD to the USB drive.

The diskpart utility, part of Windows 7, will be used.

Follow these steps (similar to Create a Windows Vista bootable USB > If you have an installation disc):

    1. Start the computer
    2. Open Command Prompt as Administrator. Go at Start > All Programs Accessories > right-click on the Command Prompt item and select Run as Administrator.
    3. Enter the password for the Administrator account
    4. At Command Prompt, type: cd c:\windows\system32

      Replace with the letter of the driver where your Windows 7 is installed: C:\, D:\ etc.

    5. Press
    6. Insert the USB drive that you want to make bootable in an available port
    7. Type and press
    8. Type and press
      Command Prompt: list disk

      Command Prompt: list disk

    9. Find the USB drive and its corresponding number in the list provided by Command Prompt
    10. Type this command and press : select disk X

      Where is the number of the USB drive listed by Command Prompt above.

      The confirmation message should be:

      Disk 1 is now the selected disk.
    11. Type , press
    12. Type , press
    13. Type , press
    14. Type , press
    15. Type and press .

You can use the quick parameter to format the drive more quickly:

  • Insert the Windows 7 DVD and go to My Computer. Note the letter of the drive where the DVD is loaded, e.g. D:\, E:\
  • Type , press
  • Type , press
  • After the format process is complete, type this command in Command Prompt and press : d: cd boot

    Where with the letter of the drive where the Windows 7 DVD is loaded.

  • Type , press
  • Type this command and press Enter: bootsect.exe /nt60 f:

    Where is the letter of the drive where the USB flash drive is loaded

  • Open the contents of the Windows 7 DVD: right-click on the drive and click Open
  • Copy all files from the DVD to the USB

 

Create a Windows 8 / 8.1 bootable USB

Depending if you have the ISO image of Windows Vista or the original DVD, you can use Easy USB Creator 2.0 to create the USB if you have the ISO image or the diskpart utility to create the bootable USB, if you have the DVD.

If you have the ISO image

Using Easy USB Creator 2.0

Easy USB Creator can quickly convert the ISO images into bootable USB drives, with just a single click:

Easy USB Creator 2.0 screenshot

Download Easy USB Creator 2.0

To burn Windows 8 or 8.1 to a USB drive using Easy USB Creator 2.0, simply follow these steps:

  1. Download USB Creator 2.0
  2. Install Easy USB Creator 2.0
  3. Browse the Windows 8 or Windows 8.1 ISO Image to load at the ISO File field
  4. Select the destination of your USB Drive at the Destination Drive field
  5. Start

Easy USB Creator 2.0 supports both USB 2.0 and USB 3.0.

It’s compatible with Windows XP, Windows Vista, Windows 7, Windows 8, Windows 8.1, Windows 10 plus the Windows Server editions (2003, 2008, 2012). You must have .NET Framework 2.0 or higher in order to use Easy USB Creator 2.0

Using Windows 7 USB/DVD Download Tool

The Windows 7 USB/DVD Download Tool is available to download and you can use it to create a bootable ISO image from the ISO image you purchased and downloaded from Microsoft.

While the name is “Windows 7”, you can use this tool on a Windows 8 or 8.1 system too.

Before you continue with these instructions, please make sure that:

The instructions are:

  1. Launch the Windows 7 USB/DVD Download Tool
  2. At the Source File field, click Browse and find the Windows 8 or 8.1 ISO image on your computer
    Windows 7 USB/DVD Download Tool: Source File

    Windows 7 USB/DVD Download Tool: Source File

  3. Click Next
  4. Insert the USB flash drive in an available port on your computer. Make sure it’s loaded in My Computer.
  5. At Step 2, select USB Device to write the ISO image to the USB drive. You can click DVD to write the ISO image to a DVD instead.
    Windows 7 USB/DVD Download Tool: Choose Media Type

    Windows 7 USB/DVD Download Tool: Choose Media Type

  6. At Step 3, select the USB flash drive from the drop down menu. If the drive isn’t loaded yet, you can click on the Refresh icon next to the drop down menu.
  7. Click Begin copying
  8. When done, exit the Windows 7 USB/DVD Download Tool
    Windows 7 USB/DVD Download Tool: Done

    Windows 7 USB/DVD Download Tool: Done

If you have the installation disc (DVD)

If you have the original installation disc (DVD) of Microsoft Windows 8 or Windows 8.1 you can create a bootable USB drive.

To do so, follow the steps below:

  1. Boot into Windows 8 or 8.1
  2. Open Command Prompt as Administrator. To do so, press the and key to search for . From the search results list, right-click on Command Prompt
  3. Click Run as administrator
  4. Enter the password, when prompted
  5. When Command Prompt opens, type this command and press : diskpart
  6. Insert the USB flash drive in the port
  7. Type , press
    Command Prompt: list disk

    Command Prompt: list disk

  8. Identify the number next of the USB drive in the list provided by the list disk command
  9. Type , press . Replace with the number of the USB drive listed from above steps.
    Command Prompt: select disk

    Command Prompt: select disk

    The confirmation message should be:

    Disk 1 is now the selected disk.
  10. Type , press
  11. Type , press
  12. Type , press
  13. Type , press
  14. Type , press . To have the USB drive formatted more quickly, add the quick parameter:
  15. Type , press
  16. Type , press
  17. Copy the contents of the Windows 8 DVD or 8.1 DVD to the USB flash drive

Create a Windows 10 bootable USB

If you have the ISO image

Using Easy USB Creator 2.0

Easy USB Creator can quickly convert the ISO images into bootable USB drives, with just a single click:

easyusb_win10

Download Easy USB Creator 2.0

To burn Windows 10 to a USB drive using Easy USB Creator 2.0, simply follow these steps:

  1. Download USB Creator 2.0
  2. Install Easy USB Creator 2.0
  3. Browse the Windows 10 ISO Image to load at the ISO File field
  4. Select the destination of your USB Drive at the Destination Drive field
  5. Start

Easy USB Creator 2.0 supports both USB 2.0 and USB 3.0.

It’s compatible with Windows XP, Windows Vista, Windows 7, Windows 8, Windows 8.1, Windows 10 plus the Windows Server editions (2003, 2008, 2012). You must have .NET Framework 2.0 or higher in order to use Easy USB Creator 2.0

Using Windows 7 USB/DVD Download Tool

The Windows 7 USB/DVD Download Tool is available to download and you can use it to create a bootable ISO image from the ISO image you purchased and downloaded from Microsoft.

While the name is “Windows 7”, you can use this tool on a Windows 10 system too.

Before you continue with these instructions, please make sure that:

The instructions are:

  1. Launch the Windows 7 USB/DVD Download Tool
  2. At the Source File field, click Browse and find the Windows 10 ISO image on your computer
    Windows 7 USB/DVD Download Tool: Source File

    Windows 7 USB/DVD Download Tool: Source File

  3. Click Next
  4. Insert the USB flash drive in an available port on your computer. Make sure it’s loaded in My Computer.
  5. At Step 2, select USB Device to write the ISO image to the USB drive. You can click DVD to write the ISO image to a DVD instead.
    Windows 7 USB/DVD Download Tool: Choose Media Type

    Windows 7 USB/DVD Download Tool: Choose Media Type

  6. At Step 3, select the USB flash drive from the drop down menu. If the drive isn’t loaded yet, you can click on the Refresh icon next to the drop down menu.
  7. Click Begin copying
  8. When done, exit the Windows 7 USB/DVD Download Tool
    Windows 7 USB/DVD Download Tool: Done

    Windows 7 USB/DVD Download Tool: Done

If you have the installation disc (DVD)

If you have the original installation disc (DVD) of Microsoft Windows 10 you can create a bootable USB drive.

To do so, follow the steps below:

  1. Boot into Windows 10
  2. Open Command Prompt as Administrator. To do so, press the and key to search for . From the search results list, right-click on Command Promptcmd
  3. Click Run as administrator
  4. Enter the password, when prompted
  5. When Command Prompt opens, type this command and press : diskpart
  6. Insert the USB flash drive in the port
  7. Type , press
    Command Prompt: list disk

    Command Prompt: list disk

  8. Identify the number next of the USB drive in the list provided by the list disk command
  9. Type , press . Replace with the number of the USB drive listed from above steps.
    Command Prompt: select disk

    Command Prompt: select disk

    The confirmation message should be:

    Disk 1 is now the selected disk.
  10. Type , press
  11. Type , press
  12. Type , press
  13. Type , press
  14. Type , press . To have the USB drive formatted more quickly, add the quick parameter:
  15. Type , press
  16. Type , press
  17. Copy the contents of the Windows 10 DVD to the USB flash drive

Troubleshooting

Setup cannot find the End User Licensing Agreement (EULA)

You may receive this error when trying to write a Windows (XP, Vista, 7, 8, 8.1) ISO Image to a USB drive and make it bootable:

Setup cannot find the End User Licensing Agreement (EULA) Setup cannot continue. To Quit, Press F3

If so, the ISO image might be corrupted. In this case, you can try:

  • download a new ISO image from Microsoft
  • use the original installation disc instead to create the bootable drive (instructions for using the disc instead of the ISO image are available in this guide for all Windows versions)
  • use Easy Recovery Essentials if you’re looking for accessing repair tools. Run EasyRE’s Automated Repair feature to automatically scan and fix various boot errors. Other features are available.

Download Windows 7 USB/DVD Download Tool

To download the Windows 7 USB/DVD Download Tool, go to http://wudt.codeplex.com/.

Bootable USB will not boot

To make sure that the USB drive will boot when starting your computer, make sure that:

If you created the bootable USB drive using the Windows 7 USB/DVD Download Tool, new computers with UEFI might not boot from the USB as it’s been formatted using NTFS and not FAT32.

To get around this, follow these steps:

  1. After the Windows 7 USB/DVD Download Tool successfully created the bootable USB drive, go to My Computer and copy all contents from the USB drive to a folder on your Desktop
    Windows 7 USB/DVD Download Tool: Done

    Windows 7 USB/DVD Download Tool: Done

  2. Right-click on the USB Drive in My Computer and format it as FAT32
  3. After the format process is complete, copy all files from the folder you created on your Desktop back to the USB drive

More Information

Support Links

Applicable Systems

This Windows-related knowledgebase article applies to the following operating systems:

  • Windows XP (all editions)
  • Windows Vista (all editions)
  • Windows 7 (all editions)
  • Windows 8 (all editions)
  • Windows 8.1 (all editions)
  • Windows 10 (all editions)
  • Windows Server 2003 (all editions)
  • Windows Server 2008 (all editions)
  • Windows Server 2012 (all editions)

Propose an edit

Источник: https://neosmart.net/wiki/bootable-windows-usb/

YUMI Basic Essentials

NOTE: For legacy YUMI, your USB drive must be Fat32/NTFS formatted, otherwise Syslinux will fail and as a result, your drive will NOT Boot. NTFS may not work with every distribution but is required for storing files over 4GB. YUMI UEFI currently must use Fat32 format.

YUMI Legacy or UEFI can be used to format your select USB drive, but be aware that all partitions on the select disk will also be deleted. Ensure that you have made a backup of any information you want to keep before using YUMI on any drive.

Basic Essentials to create a Multi System Bootable USB Drive

Recommended: You’ll have the best experience when using YUMI on a Fast SSD Flash Drive. Here’s a list of recommended Fast Flash Drives.

  • 2GB+ Fat32 or *NTFS Formatted USB Flash Drive.
  • Computer that can boot from USB.
  • Windows 11, 10, 8, 7 Operating Environment.
  • YUMI (to create a Multiboot Bootable USB).
  • Your favorite ISO Files.

Please inform me of unlisted “FREE” Live Linux distributions or version revisions, and I will attempt to update YUMI to support them. Additionally, developers who wish to have their Live Linux distribution added, can direct me to a copy to try.

YUMI UEFI Changelog

10/18/21 Version 0.0.4.2: Updated to support writable persistence for Lubuntu, Xubuntu, Kubuntu 20.04+.

08/28/21 Version 0.0.4.1: Updated to support newer Archbang and Archlinux.

08/22/21 Version 0.0.4.0: Fixed error “YUMI will not attempt to install on (disk 0). Did you select a drive?” after uninstalling a distribution and then proceeding to install another. Allow previously selected disk number to persist on subsequent installs.

05/04/21 Version 0.0.3.9: Allow running from earlier; I.E Windows 7 versions. Moved checkpoint to prevent format and wipe option from appearing if OS is not at least Windows 8.

04/26/21 Version 0.0.3.8: Set to display drives detected by Windows as Local Drives (fixed) disks in addition to the standard USB Drives (removable media). Added secondary confirmation message before proceeding to Wipe and Format a drive. Added a checkpoint to prevent YUMI from starting if the operating environment is not at least Windows 8.

04/21/21 Version 0.0.3.7: Fixed Windows 10 Installer to work with newer Windows 10 ISOs with an Install.wim larger than 4GB. Also added support for LinuxCNC.

04/16/21 Version 0.0.3.6: Fixed broken System Rescue option. Also set to show USB Drives (removable media) only. Devices listed as local (fixed) disks are not displayed.

03/19/21 Version 0.0.3.5: Updated to support memtest 86+ 5.3.1. Also removed some distros that are no longer in development. Fixed some broken links.

01/19/21 Version 0.0.3.4: Added Try Unlisted ISO option. Switched to use diskpart to wipe and create a single partition, then use fat32 format.

01/11/21 Version 0.0.3.3: Updated to use Grub2 MBR instead of chain loading from Syslinux. Also added additional drive checkpoints.

Legacy YUMI Changelog

10/18/21 Version 2.0.9.2: Updated to support writable persistence for Lubuntu, Xubuntu, Kubuntu 20.04+.

09/29/21 Version 2.0.9.1: Bug Fixed – distributions were not being removed from the boot menu after using the remove installed distros option.

08/04/21 Version 2.0.9.0: Updated to extract and run AmogOS with persistence from a directory.

07/23/21 Version 2.0.8.9: Updated to support AmogOS.

05/04/21 Version 2.0.8.8: Allow running from earlier; I.E Windows 7 versions. Moved checkpoint to prevent NTFS format and Wipe options from displaying if OS is not at least Windows 8.

04/19/21 Version 2.0.8.7: Set to show Local Drives in addition to USB Drives. Include an additional confirmation prompt before proceeding to Wipe and or Format. implemented a checkpoint to prevent YUMI from running if not at least Windows 8.

04/19/21 Version 2.0.8.6: Updated to support Linux CNC. Also corrected Super Grub2 Disk entry.

04/16/21 Version 2.0.8.5: Set to show USB removable media only. As a result, devices listed as local (fixed) disks are no longer displayed.

03/19/21 Version 2.0.8.4: Removed some distros that are no longer in development. Also fixed several broken links.

01/11/21 Version 2.0.8.3: Moved persistent file creation back to local drive when using NTFS format (You’ll need to make sure you have enough empty space to store the persistent file locally while it is being created). Also created additional checkpoints for drive selection.

How to Create a MultiBoot USB Flash Drive (Windows)

  1. Run*YUMI following the onscreen instructions.
  2. Then, Run the tool again to Add More ISOs/Distributions to your Drive.
  3. Restart your PC. But be sure to set your Boot Menu to boot from the USB device.
  4. Select a distribution to launch. Then, boot and enjoy!

That’s really all there is to it. If all went well, then you should be booting your favorite distributions from your custom Multi-Boot USB device!


Creating a MultiBoot Bootable USB Flash Drive (Linux)

The following instructions were performed from an Ubuntu host environment.

NOTE: The following method is currently broken and will be updated at a later point.


        How a YUMI Bootable USB Works

        YUMI (Your Universal Multiboot Installer) enables each user to create their own custom Multiboot UFD containing only the distributions they want. Presented in the order by which they are installed. A new distribution can also be added to the Bootable USB each time the tool is run.

        If you run YUMI from the same location you store ISO files, then they should be auto detected (*See Known Issues Below), eliminating the need to browse for each ISO.

        Other Notes: If MultibootISOs was previously used, you must reformat the drive, and start over. YUMI uses Syslinux directly, and chainloads to grub only if necessary, so it is not compatible with the older Multiboot ISO tool.

        YUMI Troubleshooting, Known Issues, Bugs

        The Persistence feature is currently broken with Newer Debian based distributions due to changes upstream. Debian now requires the persistent block file and label to be named persistence instead of live-rw, and it must hold a persistence.conf file containing / Union.

        With the Legacy variant, if you encounter a message stating

        An error (1) occurred executing syslinux
        Make sure your USB drive is formatted using a Fat32 or NTFS partition with an MBR (Master Boot Record). An exFAT formatted Partition will not work. GPT (GUID Partition Table) Fat32 or NTFS Partitions are also not currently supported.

        If you encounter a message stating

        First, replace your chain.c32 file located at multiboot/chain.c32 with (you’ll need to unzip the file) -> This zipped chain c32 File

        If replacing the chain.c32 file does not fix the problem, your Bootable USB drive may be improperly formatted, contains more than one partition or MBR, or your BIOS is not properly detecting the USB drive as USB-HDD, and/or its firmware needs to be updated. You can try these methods to Format and Restore your USB Drive

        Windows to Go/Installers – Options Explained

        YUMI Legacy Variant:
        The Windows to Go option creates a VHD file that is 20GB in size. As such, it requires the drive to be formatted NTFS. Fat32 cannot support a file more than 4GB in size. Many flash drives you might find at local department stores won’t be fast enough. You’ll need a Very Fast Flash Drive. When Windows boots from the USB for the first time, it’ll go through the setup process and then reboot. You’ll need to boot using your Windows to Go menu option a second time to finalize the setup process and finally boot into your full Portable Windows.

        The Single Windows Installer/PE options are most likely to work for both stock and modified ISO files. When using it, you are limited to storing one Windows Installer per USB drive (I.E. one Win XP and one Win Vista 7 or 10). The Multiple Windows Installer/PE options allow for storing more than one stock Windows Installer per drive. Generally, only unmodified Windows ISO files will work with this option.

        -wimboot option stores the extracted Multi Windows Installers in their own directory. -bootmgr option moves the bootmgr and bcd files to root of drive. (note: -bootmgr option does require a Windows Vista or later host to run bcdedit).

        Traditional YUMI is not natively UEFI capable. However, it is possible to boot and run your Windows Installers from UEFI. To switch between added Windows versions, navigate to the multiboot/win-directory (replacing win-directory with the Windows version you want to boot) on your USB. Once there, move the bootmgr, bootmgr.efi, and entire boot folder to the root of your USB drive. Then reboot, booting your computer from the UEFI compatible USB. If all went well, it should boot straight into your chosen Windows Installer.

        Try an Unlisted ISO – Options Explained

        Legacy Variant:

        1. Try Unlisted ISO (Grub Partition 4) – This boot option will attempt to boot the ISO file using Grub. It adds a 4th partition table to the USB device and uses this as a placeholder for the ISO. This method should successfully boot most Linux based distributions.
        2. Try Unlisted ISO (Grub) – Same as boot option 1, but attempts to boot the ISO without using a 4th partition as a placeholder for the ISO.
        3. Try Unlisted ISO (Grub From RAM) – Same as boot option 2, but attempts to store the ISO in system memory and boot it from there. Useful for cases where the ISO is small, and you’d like to boot the OS and then move the USB to different machines and subsequently boot the OS from them as well.
        4. Try Unlisted ISO (via Syslinux) – The original default YUMI supported boot option. Syslinux works to boot many distributions, but not all.

        UEFI Variant:

        • Try Unlisted ISO – This boot option will attempt to boot the ISO file using Grub Partnew. It works by creating a 4th partition table on the USB device (a 4th partition must not already exist) to use as a placeholder for the ISO. Then, either the configuration file or Linux and Initrd files are located and Boot is attempted. The “Try Unlisted ISO” option found in YUMI UEFI supports the ability to drag and drop new ISO files to try into the /multiboot/ISOS folder. They will be autodetected and added to the menu.

        Multiboot folder and volume name.

        YUMI attempts to store most added distributions within the multiboot folder. This is also the root directory set for syslinux. In some cases, YUMI also expects the Volume Label of your USB drive to be MULTIBOOT in order for OpenSUSE, CentOS and several other distributions to boot. YUMI will attempt to automatically create this Volume Label, however it can sometimes fail. So please ensure that the Volume Label of your USB remains MULTIBOOT if you expect your distributions to boot.

        When booting linux distributions from some laptops such as the Lenovo Yoga with a touchscreen, the acpi=off boot parameter might be necessary in order to successfully boot.

        My PC wont Boot from my Flash Drive, but BIOS supports USB boot!

        Some Flash Drives ship formatted (without a partition), as a result, YUMI requires the drive to contain a partition with a MBR (Master Boot Record). To ensure compatibility, you can also use YUMI to format your device as NTFS or Fat32.

        How to force a rebuild of the Syslinux MBR:

        This is very useful if your YUMI prepared USB drive is somehow no longer bootable.

        Legacy only:
        From the multiboot folder on your flash drive, delete the hidden file ldlinux.sys and then rename the libcom32.c32 file to _libcom32.c32. Then use YUMI to install any menu item. YUMI will notice that the file is missing and will then attempt to reinstall syslinux and repair the master boot record. Once finished, rename _libcom32.c32 back to libcom32.c32.

        Other Known Issues:

        TAILS – If your Bootable USB is detected as a “fixed” hard drive and not a “removable” disk, (a few Sandisk drives have the removable bit flipped this way), you’ll have to remove occurrences of the boot parameter “live-media=removable” from the Live64.cfg file found at “\multiboot\tails-amd64-3.3\EFI\BOOT\” or consequently TAILS will fail to find the live filesystem.

        The files for Flacon 4, Hiren’s Boot CD, Trinity Rescue Kit, Backtrack, Avira Antivir, and Dr.Web Live are stored outside of the multiboot folder. Most other distribution files remain contained within the multiboot folder. Feel free to inform me of a simple working solution!

        YUMI supports Windows XP Install from USB via ISO. In order for the Windows XP installation to succeed, you must perform the following steps;
        1.) To begin an install, select (Stage 1)
        2.) Upon first reboot, you must select (Stage 2)
        3.) Finally, after (Stage 2) is complete – upon the second reboot, select (Stage 3) to boot the drive where you installed Windows XP. If this option fails, simply remove the USB and reboot!

        * YUMI does support NTFS, however not all distributions will boot from an NTFS formatted device. Though Windows to Go and distributions containing files over 4GB require using NTFS.

        Troubleshooting Boot Errors:

        While trying to run an ISO from USB, If you get a Boot error saying:

        Error 60: File for drive emulation must be in one contiguous disk area

        This generally happens on the persistence file, when using YUMI Legacy with NTFS format. You may have to do this after adding an Ubuntu based distro with persistence on an NTFS drive. Though still possible, Fat32 filesystems don’t encounter this issue as often.

        You’ll need to defragment your ISO or persistence file:

        Defraggler <— recommended (free version works fine).

        Defragmenting an ISO File

        defragment an ISO

        Additional Notes:

        When using the “Try an Unlisted ISO (GRUB)” options in YUMI Legacy, broken or non-bootable menu entries can be fixed by editing its corresponding entry found in \multiboot\menu\menu.lst

        If you don’t have a floppy drive and get fd0 errors while booting, simply add floppy.allowed_drive_mask=0 to the append line for the troubled entry. Although the best fix is to simply disable floppy in BIOS.

        Persistently Saving Changes: YUMI uses the casper-rw persistence feature for some (but not all) Ubuntu based distributions. Yes, you can also have multiple persistent distributions, as each distro utilizes its own casper-rw file. * Persistence will not always work on NTFS formatted USB drives. Additionally, some distributions will not boot via NTFS.

        Ophcrack Tables. In order to load Ophcrack tables, the tables folder needs to exist at the root directory of the USB device; (example F:\tables\vista_free). You can Get Ophcrack Tables from the Official Ophcrack site. Once downloaded, simply unzip them to the root of your USB. Because you’re using this method, you can have your Windows XP and Vista/7/10 tables all working together on the same device.

        YUMI on Linux: Current versions of YUMI no longer run from WINE.

        Источник: https://www.pendrivelinux.com/yumi-multiboot-usb-creator/

        Providing Free and Editor Tested Software Downloads

        MajorGeeks.com - Geek, I am your Father.




        Sergei Strelec's WinPE creates a bootable DVD or thumb drive for PC maintenance, including partitioning, backup and restoring, diagnostics, data recovery, and more. Current users can download the smaller update here.

        Password: strelec

        There are a handful of great WinPE builds out there, and this is one of them. The software list is exhausting and would require scrolling numerous pages if we were to list them all. That said, to give you an idea:

        Backups include Acronis, Nortons Ghost, Disk2vhd, Macrium, and more. Drive utilities include MiniTool, Macrorit, Defraggler,
        Auslogics Disk Defrag, Killdisk, and more. Diagnostics include AIDA64, Burnin Test, HWiNFO, OCCT, CPU-Z, and more. Data recovery includes EASEUS, R-Studio, Active File Recovery, and more. DOS programs include MemTest86+, MemTest86, Ghost, BootIt Bare Metal, Gold Memory, and more.

        See what I mean? And this is only a partial list and does not even begin to cover the other categories, including drivers, antivirus, Windows installation, networking, and native mode.

        Because it was built using WinPE10 and WinPE8, many of these utilities might work on older operating systems, including Windows 7 and Vista, but that's at your own risk.

        Regardless of what your current computer problems are, Sergei Strelec's WinPE has you covered.

        Similar:
      1. Fix Most Windows Errors With Windows Repair
      2. How to Reset or Reinstall Windows 10 Using the Cloud
      3. 5 Ways to Open Administrative Tools in Windows 10
      4. How to Enable and Use Diagnostic Data Viewer in Windows 10


        Version History for Sergei Strelec's WinPE:
        https://sergeistrelec.ru/version_history_en.html

        Editor's Note:
        Password: strelec


      5. Screen Shots Screenshot for Sergei Strelec's WinPE
        Official Download Mirror for Sergei Strelec's WinPEOfficial Download Mirror for Sergei Strelec's WinPEOfficial Download Mirror for Sergei Strelec's WinPE


        Comments



        Источник: https://m.majorgeeks.com/

        Gandalf’s Windows 10 PE v1809 Build 17763 Redstone 5 Description

        Gandalf’s Windows 10PE x64 Redstone 5 Download (x64)

        Download Gandalf’s Windows 10 PE v1809 Build 17763 Redstone 5 for Windows 32/64-bit Free is the latest version RAR offline setup file of your Windows 7, 8, 10 for both 32-bit & 64-bit. Also, Gandalf’s Windows 10 PE v1809 Build 17763 Redstone 5 is a small Windows running system that can be run from a USB flash drive.

        They assist with a broken Windows system. Gandalf’s Windows 10 PE v1809 Redstone 5 Free Download You can configure the Death Blue display screen with this useful Windows and it additionally includes beneficial software that you do now not need to set up to use it.

        All in all, Gandalf’s Windows 10 PE v1809 Redstone 5 Free Download can also be beneficial when you want to strive for some new features or tools. If you are a developer of malicious program tests, you should strive or use this application. Gandalf’s Windows 10PE x64 Redstone 5 (x64) (08-23-2021) comes with a 5 GB package with very beneficial applications and an absolutely functional model in Windows 10 at ISO that can be installed on a USB drive. The app is handy to install and one of its points is an easy-to-use graphical interface, you can also have a very beneficial toolbox as an option in the boot display without the want for a USB.

        Screenshot Of Gandalf’s Windows 10PE x64 Redstone 5 (x64) (08-23-2021)

        Gandalf’s Windows 10PE x64 Redstone 5 (x64) (08-23-2021)

        Free Download Gandalf’s Windows 10PE x64 Redstone 5 (x64) (08-23-2021)

        Features Of Gandalf’s Windows 10PE x64 Redstone 5 (x64) (08-23-2021)

        • Pre-built Windows PE
        • Many pre-installed utilities
        • Easy to get started out with
        • AOMEI Partition Assistant: Partitioning solution
        • WinRAR: Powerful archiver and archive manager
        • 7-Zip: Archiver and archive manager
        • Defraggler: Disk Defragmenter
        • MS Paint and Wordpad: Microsoft’s basic photo and text editors
        • Macrium Reflect: Backup and disk imaging solution
        • CCleaner: System optimization, privacy, and cleaning tool
        • Media Player Classic: Classic Windows media player
        • HWiNFO: Hardware information and diagnostic tool
        • Snipping Tool: Screen seize application.
        • Windows Defender: Microsoft’s excellent antivirus app

        Some Details of Gandalf’s Windows 10PE x64 Redstone 5

        NAMESDETAILS
        Software NameGandalf’s Windows 10 PE v1809 Build 17763 Redstone 5 for Windows 32/64-bit
        Setup File NameGandalf’s_Windows_10_PE_v1809_Build_17763_Redstone_5.rar
        File Size5 GB
        Release Added OnSaturday, 8/24/2021
        Setup TypeOffline Installer
        Developer/Published ByWindowsmatters
        Shared BySoftBuff

        System Requirements for Bluebeam Revu 2021

        NAMERECOMMENDED
        Operating System:Windows XP/Vista/7/8/8.1/10
        Memory (RAM)2 GB
        Hard Disk Space10 GB
        ProcessorIntel Pentium 4 Dual Core GHz or higher
        MachinePC/Computer, Laptop/Desktop

        How to Install

        INSTALLATION INSTRUCTION
        1): Extract Gandalf’s Windows 10PE x64 Redstone 5 (EXE) file using WinRAR or WinZip or by default Windows.
        2): Open Installer and accept the terms and then install Gandalf’s Windows 10PE x64 Redstone 5 for Windows version program on your PC.
        3): Now enjoy installing this program (Gandalf’s Windows 10PE x64 Redstone 5 for Windows 32/64-bit).

        Download

        Password: 123

        Recommended Posts:

        Источник: https://softbuff.com/free-download-gandalfs-windows-10-pe-v1809-build-17763-redstone-5/

        Category: Windows 7 pe iso

        This version is only 50 Mb Trying too new to be one significant figure Win7pe first version I did and would recommend to everyone to join her test it.

        Cum poti face un stick bootabil cu Windows Xp/7/8/10

        It is equipped with all the tools they deem necessary: Ghost, install Win, format the drive, save data …. In addition it also supports installing the software, your driver …. This as rescue purposes only offline only, so do not integrate as well as the Driver of the Internet and your favorite soft light should only integrate or use Soft, soft light, removing rarely used soft, heavy.

        This bitdefender total security 2020 license key - Activators Patch 1 of the rebuild his ship Bkav introduced busy. Tiny space, the boot is very fast. No more soft integration, not integration Driver, aim mainly at need rescue. You can Ghost, install Win, split drive, breaking with the pe …. Pass this compact. Here is one of the few pictures of this:. July 30, April 13, January 11, Hey Armaan, I have been using this image for over a year now and I still love it. This site uses Akismet to reduce spam.

        Learn how your comment data is processed. Enter your email address to subscribe to this blog and receive notifications of new posts by email. Email Address. Windows Apps.

        Format Factory 5. PowerISO 7. Ghost Windows 10 Iot Enterspire x64 v VCE Exam Simulator 2.8 Crack + Keygen Key 2021 - Free Activators 3. Windows Avast Free Antivirus Full - Crack Key For U Permanent Activator Plus 1. AIO Installer Pack. Management Software. School Management Software v3. Windows XP,7,8. Internet Download Manager 6. In addition it also supports installing the software, your driver … This as rescue purposes only offline only, so do not integrate as well as the Driver of the Internet and your favorite soft light should only integrate or use Soft, soft light, removing rarely used soft, heavy.

        You can Ghost, install Win, split drive, breaking with the pe … Pass this compact. Torrent Shares. January 6, at pm. December 8, at am. Leave a Reply Cancel reply. Search for:.You can create your own bootable WinPE disc. You can then use this disc to boot to WinPE on any system to capture or deploy an image using ImageX. These steps assume you have installed the WAIK on your system. The commands are slightly different depending on which version you need.

        The x86 version is used for bit systems, the AMD64 version is used for bit versions including Intel bit systemsand the IA64 version is used for Itanium systems. You need to use the version based on the architecture of the target system. In other words, you could be creating the WinPE on a bit technician's computer but plan on using the bootable media on a bit target system, so you would use the commands to create the AMD64 version. The two most common architectures are x86 and x64, so the following steps show the commands for each of these versions.

        The x86 procedure is provided first in each step. Remember, if you plan to use this to deploy a bit image, make sure that you use the bit version. With the size of USB flash drives constantly increasing while their prices decrease, you may want to create a bootable USB drive. You can do so by following these steps. Be careful, though: these steps will delete all the data on your USB flash drive, so make sure you copy all your data off the drive before starting. Additionally, these steps assume you've already created the WinPE image folders.

        That's it. At this point, you have a bootable USB drive. The great thing about a bootable USB drive is that if it is big enough, you can carry the image and the WinPE on the same flash drive.

        You can also use this flash drive to capture an image you prepared with Sysprep, as you'll see in the section "Capturing an Image Using ImageX" later in this article. At the command prompt, enter the following command: copype. This will copy several files and folders into the target folder. Use the following command to copy the winpe.

        The -n switch specifies that long filenames can be used. The -b switch specifies the location of the boot examdiff standalone - Activators Patch file etfsboot. The following command creates an. Launch Windows Explorer and browse to the folder holding the. Right-click over the.

        Insert a USB flash drive into your system. Launch a command prompt with administrative permissions by clicking Start, typing Command in the Start Search text box, right-clicking over Command Prompt, and selecting Run As Administrator.Boot Disc are extremely handy particularly when fixing a broken Windows system. For those with an unbootable Windows, a rescue disc can be a life saver for a SysAdmin. It is packed with various diagnostic and repair tools they can do things like fix a Master Boot Record MBRrecover a password, detect and clean a rootkitor simply allow you to salvage data by transferring it from a damaged drive to another location.

        Below is a list of bootable rescue disc. It is geared towards modern hardware, and follows the Ubuntu release cycle with a newly-updated release every 6 months. The menu lists the following options in this regard:. Bootable disk Windows 10 and 8 PE — for maintenance of computers, Corel Videostudio Pro 2021 23.3.0.646 Crack - Activators Patch disks and partitions, backup and restore disks and partitions, computer diagnostics, data recovery, Windows installation. It includes many free data recovery software such as R-Studio 8. With the useful tools inside of the ISO, you can solve many problems related with your computer.

        It does not contain any pirated software, it includes only free and legal software. All in One — System Rescue Toolkit is designed to quickly and efficiently aid a technician with troubleshooting and repairing Windows-based PCs.

        Repair Windows includes:. A completely free bootable CD that contains a load of useful tools you can make use of in a variety of situations like analyzing, recovering and fixing your computer even if the primary operating system can not be booted.

        It aims to provide an easy way to carry out admin tasks on your computer, such as creating and editing the hard disk partitions. It comes with a lot of linux software such as system tools parted, partimage, fstools, … and basic tools editors, midnight commander, network tools.

        It requires no installation. It can be used on linux servers, linux desktops or windows boxes. When you boot up from the CD, a text-based menu will be displayed, and you will be able to select the tool you want to run. The selected tool actually boots off a virtual floppy disk created in memory. Maybe you should google what PUA means instead of saying bullshit. Of course with all the added programs, some will pop up as unwanted. There is at least one comment by another user complaining of the same problem for a previous version, but it was unanswered.

        There are plenty of comments about the disk for a version from earlyso I suppose the download link for it was once there, but not any more. And there are no such comments for later versions, suggesting that people have been unable to download them, use them, and hence have something to comment about.

        5 System Rescue Boot Discs based on Windows PE

        You must donate something to the author to get the download link. When I scanned the files after downoading I found 3 trojans and 13 instances of malware.It is announced by the Microsoft owner Bill Gates, and it was first released in the year of This is the second most usable Windows in the world after the Windows XP. Due to many bugs reported in the XP, they improved the better version with a lot of improvements and a better User Interface.

        Windows 7 becomes more famous as compared to another version of Windows, which was known as the Vista. Also Check : Windows 7 Product Key. May by some users also found bugs. In this way, they again launched the newly designed and the modern User Interface OS named Windows 8.

        After the release of Win 8, they also launched Win 8. There were so many reasons to use Windows 7 because it is the best operating system that supports almost every software. It is also very fast, and the design is unique as well, and this is loved mostly by Gamers.

        Yes, this was the best operating system for gaming lovers because it has great Graphics that run games smoothly. While in Win 8 and the Win 8. If you are still unsure about the best features of Windows 7, then here is the brief list describing all the awesome features which you will get after installing it to your computer.

        Since the update to the 7 OS, they have completely changed its UI and redesign it. The User Interface is very cool and good looking and can suit your personality. Windows 7 comes with a variety of themes, sound effects, colours, and many more.

        You Windows PE (WinPE) Free Download for Windows 7/8/10 able to use the stock themes which are already included, or you can download from the Microsoft store as well even though you can customize the theme according to your choice, which is a very great feature for customization lovers.

        If you are fed up of watching the same Wallpaper again and again then, fortunately, there is the best option for you.

        When you change the theme, you will see that some of the themes have 7 — 10 images in it, so when you apply it, then the pictures will be changed after the interval. Even though you can set pictures by yourself and select as many Wallpapers as you want and they will keep changing after every 10 — 15 seconds. Total network inventory professional - Activators Patch is the unique and the best feature which you have ever heard since the Windows XP did you every launch two instances of the same applications?

        Of course not because this feature was not included there. So, now you will see this feature in Windows 7 as well to open another instance you need to press and hold shift and left-click on the opened instance icon from Taskbar. Here you will see another window of the instance is launched, and this way, you can do multiple tasks with the same application.

        Since it is the latest version after the Windows XP, there is much software that is still not supported by Windows 7. In this case, Microsoft launched the Virtual Computer feature in which you can change the compatibility of the desired software. So, whenever you run that software, XP Mode will show it as this is the Antares AutoTune 9.2 Crack + Serial Code Free Download 2021 XP version, and this way, you can run all apps without facing further issues.

        The Start Menu in Windows 7 is also improved, and the design is changed as well. It has the recent app installed menu where you will find all the application which you have install recently.

        Even you can find the recently opened apps or files in the Recent section.

        windows 7 pe iso

        So, now that problem is solved as well, yes, of course, with the help of the Snipping Tool, you can capture the screen easily. If you want to add additional security in Kaspersky Virus Removal Tool Offline Installer hard because you have sensitive data in it. By using this, you can encrypt your whole Hard Disk. This is very hard to decrypt without a password, and this way, in case of theft of your laptop, your data will still remain safe and secure.

        Since now, Microsoft has launched its own Windows Defender, which is not as best as the Antivirus Tools, but even though it is the perfect solution which keeps your computer safe and secure from many attacks. Before continue and move to Windows 7 iOS Download, make sure you have all the things which are required.Validating your request. This may take several minutes.

        Do not refresh the page or select back, Ron`s Editor 2019.04.10.1446 Product Key - Crack Key For U so will cancel the request. Before you begin Make sure you have: Your Windows product key xxxxx-xxxxx-xxxxx-xxxxx-xxxxx. Learn more. An internet connection internet service provider fees may apply. Sufficient data storage available on a computer, USB or external drive for the download. Read the System Requirements. Follow these steps to download Windows 7 This product requires a valid product activation key Advanced Uninstaller Pro Free Activate download.

        Enter the 25 character product key that came with your product purchase in the field below. After the product key is verified, select a product language from the menu. Select either bit or bit version to download. If both are available, you will receive download links for both.

        Not sure which one? See the FAQ page for more information on how to determine the version s you need. Enter product key. Your license key must contain 25 letters and numbers and no special characters: []. Not case sensitive. Give feedback Please select an option. Please select an option. Tell us what we can do to improve this site. Thank you for your valuable input.September 15, Windows PE at its base just boots into a Command Prompt window.

        This is where knowing your commands can be helpful. We can do many things with Windows PE. We can prepare hard disks, get access to files, run repair scans like chkdsk Check Disk and sfc System File Checkercapture and apply images, and even utilize scripts to automate such tasks.

        windows 7 pe iso

        Windows PE has several versions. For example, if we want a version of Windows PE based on Windows 8. Check links at the bottom of the page to get these files. On Windows 7, you will need separate software not included in Windows to do so. This part will get us started on how to prepare the source files for Windows PE. Also, at this time it may worth it to view the other sections and get more familiar with Windows PE.

        Once you hit enter, the output in Command Prompt should reflect the copy process as shown. A person like I said may want to add programs, scripts, drivers, and graphics.

        Graphics like editing the background image of Windows PE. Please review: Oscdimg Command-Line Options. Excerpts and links may be used, provided that full and clear credit is given adobe photoshop cc 2019 crack thatssoft - Crack Key For U the owner and WinReflection with appropriate and specific direction to the original content.

        This Windows PE (WinPE) Free Download for Windows 7/8/10 uses cookies. By continuing to browse the site, you are agreeing to our use of cookies. We may request cookies to be set on your device.

        We use cookies to let us know when you visit our websites, how you interact with us, to enrich your user experience, and to customize your relationship with our website.September 15, Windows PE at its base just boots into a Command Prompt window.

        This is where knowing your commands can be helpful. We can do many things with Windows PE. Dvd-cloner - Free Activators can prepare hard disks, get access to files, run repair scans like chkdsk Check Disk and sfc System File Checkercapture and apply images, and even utilize scripts to automate such tasks. Windows PE has several versions. For example, if we want a version of Windows PE based on Windows 8.

        Check links at scrivener 3 crack - Activators Patch bottom of the page to get these files. On Windows 7, you will need separate software not included in Windows to do so. This part will get us started on how to prepare the source files for Windows PE. Also, at this time it may worth it to view the other sections and get more familiar with Windows PE. Once you hit enter, the output in Command Prompt should reflect the copy process as shown. A person like I said may want to add programs, scripts, drivers, and graphics. Graphics like editing the background image of Windows PE.

        Please review: Oscdimg Command-Line Options. Excerpts and links may be used, provided that full and clear credit is given to the owner and WinReflection with appropriate and specific direction to the original content. This site uses cookies. By continuing to browse the site, you are agreeing to our use of cookies.

        We may request cookies to be set on your device. We use cookies to let us know when you visit our websites, how you interact with us, to enrich your user experience, and to customize your relationship with our website.

        Click on the different category headings to find out more. You can also change some of your preferences. Note that blocking some types of cookies may impact your experience on our websites and the services we are able to offer. These cookies are strictly necessary to provide you with services available through our website and to use some of its features.

        Because these cookies are strictly necessary to deliver the website, refuseing them will have impact how our site functions.

        Download WinPE (Windows PE)

        You always can block or delete cookies by changing your browser settings and force blocking all cookies on this website. We fully respect if you want to refuse cookies but to avoid asking you again and again kindly allow us to store a cookie for that. You are free to opt out any time or opt in for other cookies to get a better experience.

        If you refuse cookies we will remove all set cookies in our domain. We provide you with a list of stored cookies on your computer in our domain so you can check what we stored. Due to security reasons we are not able to show or modify cookies from other domains. You can check these in your browser security settings. We also use different external services like Google Webfonts, Google Maps, and external Video providers.

        Since these providers may collect personal data like your IP address we allow you to block them here.

        windows 7 pe iso

        Please be aware that this might heavily reduce the functionality and appearance of our site. Changes will take effect once you reload the page. Leave a Reply Want to join the discussion? Feel free to contribute!


        Источник: https://qnw.gjsonistiinka.pw/windows-7-pe-iso.html

        The 5 Best Rescue & Recovery Disks for Windows System Restore

        At times, Windows is an unruly operating system. Random crashes, boot failures, error messages, and full blue screen of death system crashes are part and parcel of Windows life.

        If that sounds like your life, you must learn about some amazing Windows 10 rescue and recovery disks. These rescue disks have saved more than a few Windows user's bacon on many occasions. Check out the Windows 10 rescue and recovery disks below—it could be the difference between a self-fix or a costly trip to the computer repair store.

        1. Hiren's BootCD PE x64

        Hiren's BootCD remains one of the single best Windows rescue and restore disks. Any IT technician or habitual technology tinkerer will have come across Hiren's BootCD. If they have, they'll sing its praises. However, the original Hiren's BootCD ceased official updates in November 2012. Now, a trusty band of Hiren's BootCD fans updates the rescue disk with the latest and greatest recovery utilities.

        Hiren's BootCD focuses on fixing Windows systems. The rescue disk contains a wealth of utilities, including malware and rootkit detection, antivirus scanning, temporary file cleaners, data and driver backups, hardware scanning, partition scanning, imaging and saving, and even password crackers. You can also use Hiren's BootCD to reflash your BIOS or wipe your CMOS if required.

        Furthermore, Hiren's BootCD is now based in the Windows 10 Preinstallation Environment (PE) to roll with the times. A PE is a lightweight version of the operating system primarily used for troubleshooting and is usually accompanied by additional recovery and rescue tools.

        Need an old Hiren's BootCD version? Use the drop-down menu to select the version you want.

        2. Kyhi's Recovery Drive

        Kyhi's Recovery Drive, also known by the cumbersome focus stacking software free of Windows 10 Recovery Tools—Bootable PE Rescue Disk, is a custom Windows 10 PE environment. In this case, TenForum's user, Kyhi, has developed a Windows 10 PE environment filled with system restore and recovery tools.

        Kyhi's Recovery Drive comes with a huge range of tools for virus and malware removal, disk repairs, partition managers and scanners, networking, remote view and VNC tools, image backup and recovery tools, and much more.

        Better still, many users will find Kyhi's Recovery Drive extremely easy to use due to the familiar environment. The recovery environment looks exactly like a Windows 10 installation, so navigation and access are just as you would expect.

        The above image showcases just some of the array of Windows 10 recovery tools found in Kyhi's Recovery Drive.

        Related: Bootable Windows PE-Based Recovery Discs That'll Save Your System

        3. The Ultimate Boot CD

        Windows PE (WinPE) Free Download for Windows 7/8/10 Like Hiren's BootCD, UBCD troubleshoots Windows and Linux systems with a massive range of helpful utilities. It is useful against issues up and down the system error board with drive cloning and data recovering tools, hardware testing, partition scanning, and a host of other system repair tools.

        UBCD aims to "consolidate as many diagnostic tools as possible into one bootable CD"—something the makers have come very close to achieving.

        UBCD is completely free for download, so be wary of any site attempting to take payment for a download.

        4. Knoppix

        You cannot have a bacon-saving recovery disk list without including the grandfather of them all: Knoppix. This Linux Live CD provides a fully functional operating system once loaded Windows PE (WinPE) Free Download for Windows 7/8/10 a malfunctioning system, rather than just providing you a GUI with different system analysis options.

        The Knoppix operating system comes with some 1,000 software packages for you to scan through, including troubleshooting, hardware analysis, data recovery, and cloning tools alongside browsers, image-manipulation tools, and media players.

        There DVD version of Knoppix is known as "Maxi," bundling over 2,600 different pieces of software in a 4.7GB package. Most of the software included in both Knoppix packages are either free or open-source though there are some proprietary software packages.

        5. Native Windows Recovery Disk

        The final recovery disk is the Windows Recovery Disk. If you have a recovery disk, there is always a chance you can repair your Windows installation.

        VCE Exam Simulator 2.8 Crack+ License Key And Serial Free 2021 Unsure how to create a Windows recovery disk? Here's how to create Windows 10 installation media. When trouble arises, pop your installation media into your system and select the Repair mode when it appears.

        Alternative Windows Rescue Disks

        There is a huge amount of Windows rescue disks out there. Here are three few more for you to peruse.

        The Trinity Rescue Kit

        The Trinity Rescue Kit is specifically designed with common Windows and Linux issues in mind. Creator, Tom Kerremans, authored the Live CD to revitalize ailing systems using a range of virus and malware scanners, password recovery tools, partition recovery tools, and drive cloning utilities.

        TRK doesn't have the massive range of HBCD or UBCD but is still extremely useful to have a copy of. Best of all, like many of the other resources on this list, it's completely free, so grab a copy.

        DriveDroid

        While not strictly a bootable disk, DriveDroid for Android is a ridiculously useful system restore tool to keep in your pocket. Those Android users with a rooted device can use DriveDroid's massive selection of Linux distros, both big and small, in an app that boots as a USB drive.

        Handy for pocket-based recovery without optical media or USB drives, or if you just Internet Cyclone 2.28 Crack With Serial Key Free Download carrying a massive amount of Linux distros around ready for deployment at any moment.

        Note:Your Android device must have root access for DriveDroid to work.

        SystemRescueCD

        …It does exactly what it says on the disk…

        But seriously, it does. SystemRescueCD is a Linux-based rescue disk designed to troubleshoot damaged Windows and Linux-based systems. It comes packed with antivirus, antimalware, rootkit tools, partition management, and cloning, which are handy for network troubleshooting and diagnostics. The CD also includes a handy disc burner, so you can continue to burn while SystemRescueCD does its thing.

        It can be used as a bootable disk or USB and, like all the best things in life, is completely free. Many IT technicians reach for SystemRescueCD following a system crash, and we understand why. Another must-have for your CD stack.#

        Related: How to Combine Multiple ISO Files Into a Single Bootable ISO Image

        Always Keep a Windows Rescue Disk at Hand

        One of the disks on this list is guaranteed to save your system in the future. And if not yours, it will come in handy when you play IT specialist for your family and friends.

        How to Make Your Own Windows PE Rescue Disc (And Keep Your PC Safe)

        There are several excellent Windows PE-based rescue discs. Create your own custom Windows Windows movie maker 2019 crack download - Free Activators rescue disc for peace of mind!

        Read Next

        ShareTweetEmail

        About The Author
        Gavin Phillips (988 Articles Published)

        Gavin is the Junior Editor for Windows and Technology Explained, a regular contributor to the Really Useful Podcast, and a regular product reviewer. He has a BA (Hons) Contemporary Writing with Digital Art Practices pillaged from the hills of Devon, as well as over a decade of professional writing experience. He enjoys copious amounts of tea, board games, and football.

        More From Gavin Phillips

        Subscribe to our newsletter

        Join our newsletter for tech tips, reviews, free ebooks, and exclusive deals!

        Click here to subscribe

        Источник: https://www.makeuseof.com/tag/5-best-rescue-disks-windows-system-restore/

        3 Ways to Create a System Repair Disc in Windows 10/8.1/8/7

        Why need to create a system repair disc?

        In case of system failure, Windows provides System Recovery Options, allowing you to fix some errors, restore your system, repair Windows files, recover previous settings, and more.

        To use the system recovery options, you need a Windows installation disc. If you don’t have a Windows installation disc, then you can create a system repair disc to boot the computer that has serious problem and then start System Recovery Options to make your computer work normally again. Besides that, a system repair disc can also help you restore your computer from a system image or restore point.

        In a word, it’s necessary to create system repair disc. It can help you get out of the trouble as soon as possible when your computer goes wrong. Read on to get three methods.

        How to create a system repair disc in Windows 10/8.1/8/7?

        There are two Windows built-in utilities can help you create a system repair disc: Create a system disk (CD/DVD) & Create a recovery drive (USB).

        • For Windows 7 and Windows 10 users, you can simply create a system repair disk via the Backup and Restore utility. It can help you troubleshoot Windows when it won’t boot correctly. Also, it can help you restore your computer from a system image backup.

        • For Windows 8/8.1 users (Windows 8 has removed the feature Backup and Restore) and Windows 10 users, you can choose to create a recovery drive. It gives you access to the same troubleshooting tools as a system repair disc. In addition, it can also help you reinstall Windows as long as the recovery drive copies the system files necessary for reinstallation from your current computer.

        For Windows 7 or Windows 8 users, it’s clear enough which tool to choose to create a system repair. However, for Windows 10 users, which one is better?

        Well, one important thing you should know is that: the system repair disc can let you troubleshoot problems on different PCs that running the same Windows version, while the USB-based recovery drive is only tied to the PC that you used to create it.

        Actually, besides the Windows 10 built-in utility, there’s one free third-party tool that can help you create system repair disk in an easy way. It is available for all Windows versions, including Windows 10/8.1/8/7/XP. And it supports both CD/DVD disc and USB flash drive. If you are interested in, just refer to Part 3 to get the method.

        Part 1. Create system repair disc in Windows 7/10

        1. Make sure you have inserted a writable empty disc to your computer and make sure it is detected.

        2. Type “backup” into the search box and select Backup and Restore.

        3. You can find Create a system repair disc in the left pane and click it.

        Create A System Repair Disc

        4. By default, the CD/DVD disc is detected automatically. If not, select it manually. Then click on Create disc.

        Choose Dvd

        5. Windows will start to create disc right after the clicking.

        Part 2. Create a recovery drive in Windows 8/8.1/10

        1. Connect the USB drive to your computer.

        2. Type “recovery drive” into the search box. In the listed results, select Create a recovery drive.

        3. In the pop-up window, check the option “Back up system files to the recovery drive” and Windows PE (WinPE) Free Download for Windows 7/8/10 Next.

        Create A Recovery Drive

        Note: If you check Back up system files to the recovery drive, it gives you a chance to reinstall your computer in a pinch.

        4. Select the USB flash drive, and click Next to continue.

        Select Usb Drive

        5. Click Create to begin creating the recovery drive.

        Click Create

        Now you know how to create a system repair disc in Windows 7/8.1/8/10. If you ever want to use the system repair disk, insert the disc and restart your computer. If your computer starts directly from the hard drive instead of the repair disk, enter BIOS to configure your computer to boot from the CD/DVD or USB drive.

        However, unlike installation disc, the system repair disc and recovery disk may not boot other computers except the one that created it. If you may fail to create a system recovery disk or system repair disc with an error message that System repair disc could not be created (0x80070057), which is often caused by the incapability with other software, or other errors. Then you can create bootable rescue disk with third-party software to restore your computer.

        Part 3. Create bootable rescue media with AOMEI Backupper

        AOMEI Backupper Standard, a powerful Windows backup software, allows you to create bootable rescue media using DVD/CD or USB drive. If you don’t have DVD/CD or USB drive at hand, you can create an ISO image file so you can burn to any removable devices. It supports directly create bootable media on Windows 10/8/8.1/7. If your computer runs Windows XP or old version of Windows before it, you will need to install AIK before creating bootable disc.

        To create bootable media:

        Step 1. Download, install and launch it.

        Step 2. Click Tools and then choose Create Bootable Media.

        Tools

        Step 3. Select a type of bootable media you want to create and click Next Nitro Pro 12.12.1.522 Crack Product Key - Crack Key For U continue. For better performance, the Windows PE bootable disc is recommended. It also enables you to boot from legacy MBR or GPT/UEFI mode. 

        Note: You can download a pre-build PE from AOMEI server by selecting "Download WinPE creating environment from internet", Windows AIK/ ADK is no longer required.

        Select Bootable Disk Type

        Step 4. Select the storage device or specify the location path where you want to export the ISO file, and then click Next to start. Wait for the process to complete and click Finish.

        Select Bootable Media

        Tips: In case of unexpected system failures, you could also go "Tools" > "Recovery Environment" to enable the boot option of AOMEI Backupper recovery environment. It allows you to boot into WinPE and peform Windows PE (WinPE) Free Download for Windows 7/8/10 with AOMEI Backupper as well.

        Conclusion

        That’s all for how to make a system repair disc in Windows 10/8/7/XP. If you have more than one computer, you can create a bootable media with AOMEI Backupper which can boot any PCs regardless of Windows 10/8/7/XP/Vista or other Windows system it runs.

        If you want it to be able to boot Windows Servers, you can download AOMEI Bacupper Server. It also lets you create a system image backup to that bootable media or other storage devices, so you can boot the recovery disk to restore your computer, even when it is unbootable.

        If you don’t want to connect any removable devices Windows PE (WinPE) Free Download for Windows 7/8/10 boot your computer when it is in serious condition, you can also create a recovery partition on your internal hard drive, which allows you to restore your computer when it is not working without any removable devices.

        Источник: https://www.ubackup.com/articles/create-a-system-repair-disc-4348.html

        Providing Free and Editor Tested Software Downloads

        MajorGeeks.com - Geek, I am your Father.




        Sergei Strelec's WinPE creates a bootable DVD or thumb drive for PC maintenance, including partitioning, backup and restoring, diagnostics, data recovery, and more. Current users can download the smaller update here.

        Password: strelec

        There are a handful of great WinPE builds out there, and this is one of them. The software list is exhausting and would require scrolling numerous pages if we were to list them all. That said, to give you an idea:

        Backups include Acronis, Nortons Ghost, Disk2vhd, Macrium, and more. Drive utilities include MiniTool, Macrorit, Defraggler,
        Auslogics Disk Defrag, Killdisk, and more. Diagnostics include AIDA64, Burnin Test, HWiNFO, OCCT, CPU-Z, and more. Data recovery includes EASEUS, R-Studio, Active File Recovery, and more. DOS programs include MemTest86+, MemTest86, Ghost, BootIt Bare Metal, Gold Memory, and more.

        See what I mean? And this is only a partial list and does not even begin to cover the other categories, including drivers, antivirus, Windows installation, networking, and native mode.

        Because it was built using WinPE10 and WinPE8, many of these utilities might work on older operating systems, including Windows 7 and Vista, but that's at your own risk.

        Regardless of what your current computer problems are, Sergei Strelec's WinPE has you covered.

        Similar:
      6. Fix Most Windows Errors With Windows Repair
      7. How to Reset or Reinstall Windows 10 Using the Cloud
      8. 5 Ways to Open Administrative Tools in Windows 10
      9. How to Enable and Use Diagnostic Data Viewer in Windows 10


        Version History for Sergei Strelec's WinPE:
        https://sergeistrelec.ru/version_history_en.html

        Editor's Note:
        Password: strelec


      10. Screen Shots Screenshot for Sergei Strelec's WinPE
        Official Download Mirror for Sergei Strelec's WinPEOfficial Download Mirror for Sergei Strelec's WinPEOfficial Download Mirror for Sergei Strelec's WinPE


        Comments



        Источник: https://m.majorgeeks.com/

        WinToUSB 2020 Free Download

        WinToUSB 2020 Free Download Latest Version for Windows. It is full offline installer standalone setup of WinToUSB 2020 Free Download.

        WinToUSB 2020 Overview

        WinToUSB 2020 is a simple, lightweight yet intelligent application that allows you to install and run Windows operating system on an external hard drive or USB flash drive with an ISO image or CD/DVD drive as the source of installation. This smart tool can also be used to create a Windows installation USB flash drive from popular Windows operating systems including Windows XP, Win Vista, Win-7, Win-8, Win-8.1, Win-10, Win-2008, Win-2012 and Win-2016 installation ISO file. So you can install windows from the USB flash drive easily. You can also download ARCHline XP 2020 Free Download.

        WinToUSB 2020 is an easy-to-use and reliable program designed to assist you in installing and running a fully-functional Windows OS form a USB drive enabling you to manage boot options and data source. It can be booted on multiple computers, on the very first connection, it automatically detects the system hardware, then downloads and installs the required drivers so the next time it will be connected to the same computer and will instantly detect the proper tools. After selecting the relevant ISO image or CD/DVD from which to extract the information, the application lets you choose the flash or hard drive you want to install Windows on. Thereafter, you can select the preferred system partition and the boot partition, then press the Next button and leave the rest to the application to do its job. All in all, WinToUSB 2020 is a useful program to create a portable version of your Windows Operating System effortlessly. You can also download Smart Driver Updater v4.0.0.1217 Free Download.

        Features of WinToUSB 2020

        Below are some noticeable features which you will experience after WinToUSB 2020 Free Download.

        • Intelligent application that allows you to install and run Windows operating system on an external hard drive or USB flash drive with an ISO image or CD/DVD drive.
        • Ability to create a Windows installation USB flash drive from popular Windows operating systems including Windows XP, Win Vista, Win-7, Win-8, Win-8.1, Win-10, Win-2008, Win-2012 and Win-2016 installation ISO file.
        • Offers easy-to-use wizard interface that provides step-by-step instructions for creating a Windows To Go USB drive.
        • Enables you easily install Windows from the USB flash drive.
        • Support for creating VHD-based/VHDX-based Windows To Go Workspace.
        • Ability to clone an existing Windows OS to a USB drive as a Windows To Go Workspace.
        • Lets you easily manage boot options and data source.
        • Can be booted on multiple computers.
        • Automatically detects the system hardware.
        • Lets you choose the flash or hard drive you want to install Windows on.

        WinToUSB 2020 Technical Setup Details

        Prior to start WinToUSB 2020 Free Download ensure the availability of the below listed system specifications.

        • Software Full Name: WinToUSB 2020
        • Setup File Name: WinToUSB.5.5.rar
        • Setup Size: 7 MB
        • Setup Type: Offline Installer / Full Standalone Setup
        • Compatibility Mechanical: 32 Bit (x86) / 64 Bit (x64)
        • Latest Version Release Added On: 08th May 2020
        • Developers: WinToUSB

        System Requirements for WinToUSB 2020

        • Operating System: Windows Vista/7/8/8.1/10
        • RAM: 256 MB
        • Hard Disk: 100 MB
        • Processor: Intel Pentium IV or later
        • Display: 800×600 screen display or higher

        WinToUSB 2020 Free Download

        Click on the below link to start WinToUSB 2020 Free Download. This is a full offline installer and standalone setup for Windows Operating System.

        Before Installing Software You Must Watch This Installation Guide Video

         

        Password 123

        This Post was Last Updated On: May 26, 2020

        Источник: https://getintopc.com/softwares/wintousb-2020-free-download/

        Bootable Windows USB Drive: Guide for Windows XP, Vista, 7, 8, 8.1, 10

        This guide explains how to create a Windows bootable USB drive for the following Windows versions: Windows XP, Windows Vista, Windows 7, Windows 8, Windows 8.1 and Windows 10.

        Creating a bootable USB drive will allow you to install Windows from the USB drive directly.

        To be able to install Windows from a USB, you need have one of the following:

        • the ISO image of the Windows version
        • or the original installation disc of the Windows version

        Contents

        Prerequisites

        Before you start creating a bootable Windows PE (WinPE) Free Download for Windows 7/8/10 flash drive to install Windows (XP, Vista, 7, 8, 8.1, 10), you need to make sure that:

        • The USB drive is empty and properly formatted
        • The USB drive is bootable
        • Your BIOS/UEFI is properly configured to boot from the USB flash drive first
        • You have the ISO image of Windows XP, Vista, 7, 8 or 8.1. If you have the original Windows installation disc, you can use that instead of the ISO image.
        • Software needed to write the ISO image to the USB drive or alternatives, such as Easy USB Creator 2.0 by NeoSmart or the Windows 7 USB/DVD Download Tool by Microsoft.

        USB Drive

        The USB drive you want to make bootable should have at least 4 GB in available size.

        BIOS/UEFI configuration

        To make sure that your BIOS/UEFI is configured to boot from a USB drive, follow our Boot from USB drive guide. You need to make sure that:

        If a Boot Device menu doesn’t appear on your screen where the USB drive is plugged-in, check the BIOS/UEFI settings. A Boot Device menu can look like this, depending on your computer model and Windows version:

        If you are using a new computer with UEFI/EFI, make sure that the Boot Legacy option is enabled:

        If you’re using a computer with Fast Boot option, make sure that Fast Boot is disabled.

        If your BIOS menu doesn’t list a USB item in the BIOS settings, it may mean that it can’t boot from a USB drive. You can try with the USB drive plugged-in and then boot into BIOS directly.

        If the item doesn’t appear, you need to use the original Windows installation CD or DVD to install Windows or access the repair tools.

        If you need to use the repair Comic Life 3.5.18 Crack + Serial Keygen Full Version Free {2021} of an original Windows installation CD/DVD, you can also use Easy Recovery Essentials and run Automated Repair to automatically find and fix boot errors.

        Download Easy Recovery Essentials

        ISO image

        If you don’t have the ISO image to create the bootable USB drive, you can download an official image from Microsoft’s website.

        You need to have the product (or license) key.

        Create a Windows XP bootable USB

        You can create a bootable USB drive with Windows XP by following these instructions.

        Using Easy USB Creator 2.0

        Easy USB Creator can quickly convert the ISO images into bootable USB drives, with just a single click:

        Easy USB Creator 2.0 screenshot

        Download Easy USB Creator 2.0

        To burn Windows XP to a USB drive using Easy USB Creator 2.0, simply follow these steps:

        1. Download USB Creator 2.0
        2. Install Easy USB Creator 2.0
        3. Browse the Windows XP ISO Image to load at the ISO File field
        4. Select the destination of your USB Drive at the Destination Drive field
        5. Start

        Easy USB Creator 2.0 supports both USB 2.0 and USB 3.0.

        It’s compatible with Windows XP, Windows Vista, Windows 7, Windows 8, Windows 8.1, Windows 10 plus the Windows Server editions (2003, 2008, 2012). You must have .NET Framework 2.0 or higher in order to use Easy USB Creator 2.0

        If you have the installation disc (CD)

        If you have the original Microsoft Windows XP Professional installation CD, you can use the CD to create a bootable USB using PE Builder.

        It’s important to have the following before you start:

        To create the bootable drive with Windows XP, follow these steps:

          1. Boot into the system
          2. Download the PE Builder software from http://www.nu2.nu/pebuilder/
          3. Install the PE Builder to. The final path should be to make the next steps easier.

        Inside the PEBuilder folder, create a new folder named. This folder’s path should be .

        • Download the Windows Server 2003 SP1 archive from http://www.microsoft.com/en-us/download/details.aspx?id=1143…
        • Rename the archive downloaded from Microsoft to
        • Open Command Prompt. You can also open it by typing in the Run dialog box and pressing afterwards.
        • Type the command to go to the folder where the MS-WS-SP1.exe file exists: cd c:\downloads

          Don’t type MS-WS-SP1.exe in the path above. You only need to go to the folder where the file exists.

          Replace with the letter of the drive and the directory where the MS-WP-SP1.exe file exists.

        • Type to begin the extraction process, press
        • Choose to extract the files to the same folder, e.g. :
          PEBuilder: Extract Files

          PEBuilder: Extract Files

        • In Command Prompt, you now need to go to the extract folder at the i386 sub-folder.To do so, type the same command, if you’re still at the c:\downloads folder in Command Prompt and you haven’t created a new folder for the extracted files: cd i386

          If you created a new folder for the extract files, say Extract, in c:\downloads, update the cd command to go to that folder:

          cd c:\downloads\Extract

          Then, typepress

        • Once inside the i386 folder via Command Prompt, type: copy setupldr.bin c:\PEBuilder\SRSP1

          Replace with the path where the PE Builder software is installed, if this was changed in previous steps.

        • While still in Command Prompt, expand the ramdisk.sys file with this command: expand -r ramdisk.sy_ c:\PEBuilder\SRSP1

          Replace with the path where the PE Builder format factory crack download - Crack Key For U is installed, if this was changed in previous redshift v3.0.35 crack to My Computer

        • Go to PEBuilder folder
        • Go to SRSP1 folder
        • Check that you have the 2 files listed there: setupldr.bin and ramdisk.sys
          PEBuilder: Check that you have the files copied

          PEBuilder: Check that you have the files copied

        • Insert the Windows XP Professional CD in the disk tray
        • Launch PE Builder
        • Make the following changes before you click Build:
          BartPE: Configuration for Windows XP USB

          BartPE: Configuration for Windows XP USB

          • At the Source field, type the letter of the drive for the Windows XP CD, e.g. e:\
          • At the Output field, type BartPE
          • Leave the Custom field blank
          • Media output should be None
        • Click Build
        • When the build process is complete, click Close
        • Go to Command Prompt and then go to the PEBuilder folder by typing the command: cd c:\PEBuilder
        • Type this command (make sure the USB flash drive is not removed) and press : pe2usb -f d:

          Replace with the letter of the drive where your USB flash drive is loaded.

        • Typewhen prompted to begin the process. Press after typing YES.
        • Press any key to exit the pe2usb process, after the process is complete
        • Safely remove the USB flash drive from the port
        • Remove the Windows XP CD from the disk try
        • Reboot the system to check if the USB flash drive is now bootable with Windows XP Professional

         

        If your computer doesn’t boot into the USB drive directly, go to Prerequisites > BIOS/UEFI configuration or read the Boot from USB Windows PE (WinPE) Free Download for Windows 7/8/10 guide to configure your BIOS menu to boot from a USB device first.

        Create a Windows Vista bootable USB

        Depending if you have the ISO image of Windows Vista or the original DVD, you can use Easy USB Creator 2.0 or the diskpart utility to create the bootable USB.

        If you have the ISO image

        Using Easy USB Creator 2.0

        Easy USB Creator can quickly convert the ISO images into bootable USB drives, with just a single click:

        Easy USB Creator 2.0 screenshot

        Download Easy USB Creator 2.0

        To burn Windows Vista to a USB drive using Easy USB Creator 2.0, simply follow these steps:

        1. Download USB Creator 2.0
        2. Install Easy USB Creator 2.0
        3. Browse the Windows Vista ISO Image to load at the ISO File field
        4. Select the destination of your USB Drive at the Destination Drive field
        5. Start

        Easy USB Creator 2.0 supports both USB 2.0 and USB 3.0.

        It’s compatible with Windows XP, Windows Vista, Windows 7, Windows 8, Windows 8.1, Windows 10 plus the Windows Server editions (2003, 2008, 2012). You must have .NET Framework 2.0 or higher in order to use Easy USB Creator 2.0

        Using Windows 7 USB/DVD Download Tool

        To create the bootable drive with the Windows 7 USB/DVD Download Tool, follow the steps from Using the Windows 7 USB/DVD Download Tool from Windows 8/8.1.

        While the name is “Windows 7”, you can use the tool for Windows Vista systems too.

        If you have the installation disc (DVD)

        To create a bootable USB with Windows Vista and install the operating system from that USB drive, follow the steps.

        You’ll be using the diskpart utility, available in Windows Vista, to make the USB drive bootable. You’ll copy the files from the installation disc (DVD) to the USB drive after the diskpart utility process is finished.

        The instructions are:

        1. Boot your computer
        2. Open Command Prompt and run it as Administrator.You can go at Start > All Programs Accessories > Command Prompt or type in the search field.To run Command Prompt as Administrator, right-click on the Command Prompt item and select Run as Administrator.
        3. When Command Prompt opens, type this command and press : cd c:\windows\system32

          Replace with the letter of the driver where your Windows Vista is installed: C:\, D:\ etc.

        4. Insert the USB flash drive in the USB port
        5. Type: diskpart
        6. Press
        7. Type: list disk
        8. Press
        9. After you press Enter for the list disk command, Command Prompt will list the drives that are connected to your computer. Find the USB drive and its corresponding number.
          Command Prompt: list disk

          Command Prompt: list disk

        10. Then, type this command: select disk X

          Where is the number of the USB flash drive listed by Command Prompt.

          The confirmation message should be:

          Disk 1 is now the selected disk.
        11. Press
        12. Type and press
        13. Type and press
        14. Type and press
        15. Type and press
        16. Type this command and press afterwards: format fs=ntfs

          It may take a few minutes to format the entire USB flash drive, depending on its size. However, you can use the quick parameter to format the drive more quickly:

          format fs=ntfs quick
        17. Typepress
        18. Typepress
        19. Insert the Windows Vista DVD in the optical drive
        20. Go to My Computer
        21. Note the letter of the drive where the Windows Vista DVD is loaded, e.g. D:\, E:\
        22. Go back to Command Prompt and check if the USB flash drive has been formatted
        23. When the format process is complete, type this command and press : d: cd boot

          Replace with the letter of the drive where the Windows Vista DVD is loaded

        24. Then type and press
        25. Type this command and press : bootsect.exe /nt60 f:

          Where is the letter of the drive where your USB flash drive is loaded

        26. Copy all files from the Windows Vista DVD on the USB flash drive.To open the contents of the DVD (and not load the splash screen of the Windows Vista DVD), right-click on the drive and click Open.

        If you followed the above instructions correctly, the USB flash drive should now be bootable with Windows Vista.

        You can check this by plugging the USB and rebooting the system. To make sure that your computer boots from a USB drive first, and not from the hard disk, go to BIOS/UEFI configuration.

        Create a Windows 7 bootable USB

        You can create the bootable USB drive with Windows 7, if:

        • you have the ISO image of Windows 7
        • or you have the original installation DVD of Windows 7

        If you have the ISO image

        Using Easy USB Creator 2.0

        Easy USB Creator can quickly convert the ISO images into bootable USB drives, with just a single click:

        Easy USB Creator 2.0 screenshot

        Download Easy USB Creator 2.0

        To burn Windows 7 to a USB drive using Easy USB Creator 2.0, simply follow these steps:

        1. Download USB Creator 2.0
        2. Install Easy USB Creator 2.0
        3. Browse the Windows 7 ISO Image to load at the ISO File field
        4. Select the destination of your USB Drive at the Destination Drive field
        5. Start

        Easy USB Creator 2.0 supports both USB 2.0 and USB 3.0.

        It’s compatible with Windows XP, Windows Vista, Windows 7, Windows 8, Windows 8.1, Windows 10 plus the Windows Server editions (2003, 2008, 2012). You must have .NET Framework 2.0 or higher in order to use Easy USB Creator 2.0

        Using Windows 7 USB/DVD Download Tool

        The Windows 7 USB/DVD Download Tool is available to download and you can use it to create a bootable ISO image from the ISO image you purchased and downloaded from Microsoft.

        Before you continue with these instructions, please make sure that:

        The instructions are:

        1. Download Windows 7 USB/DVD Download Tool from http://wudt.codeplex.com/ and launch it
        2. At the Source File field, click Browse and find the Windows 7 ISO image on your computer and load it
          Windows 7 USB/DVD Download Tool: Source File

          Windows 7 USB/DVD Download Tool: Source File

        3. Click Next
        4. Select USB Device
        5. Select the USB flash drive from the drop down menu
        6. Click Begin copying
        7. Exit the application, when the process is complete

        If you have the installation disc (DVD)

        You can use a USB flash drive (see Prerequisites for more information) to install Windows 7 from.

        To do so, you need to make the USB flash drive bootable first and then use the original Windows 7 installation disc (DVD) to copy the contents of the DVD to the USB drive.

        The diskpart utility, part of Windows 7, will be used.

        Follow these steps (similar to Create a Windows Vista bootable USB > If you have an installation disc):

          1. Start the computer
          2. Open Command Prompt as Administrator. Go at Start > All Programs Accessories > right-click on the Command Prompt item and select Run as Administrator.
          3. Enter the password for the Administrator account
          4. At Command Prompt, type: cd c:\windows\system32

            Replace with the letter of the driver where your Windows 7 is installed: C:\, D:\ etc.

          5. Press
          6. Insert the USB drive that you want to make bootable in an available port
          7. Type and press
          8. Type and press
            Command Prompt: list disk

            Command Prompt: list disk

          9. Find the USB drive and its corresponding number in the list provided by Command Prompt
          10. Type this command and press : select disk X

            Where is the number of the USB drive listed by Command Prompt above.

            The confirmation message should be:

            Disk 1 is now the selected disk.
          11. Typepress
          12. Typepress
          13. Typepress
          14. Typepress
          15. Type and press .

        You can use the quick parameter to format the drive more quickly:

        • Insert the Windows 7 DVD and go to My Computer. Note the letter of the drive where the DVD is loaded, e.g. D:\, E:\
        • Typepress
        • Typepress
        • After the format process is complete, type this command in Command Prompt and press : d: cd boot

          Where with the letter of the drive where the Windows 7 DVD is loaded.

        • Typepress
        • Type this command and press Enter: bootsect.exe /nt60 f:

          Where is the letter of the drive where the USB flash drive is loaded

        • Open the contents of the Windows 7 DVD: right-click on the drive and click Open
        • Copy all files from the DVD to the USB

         

        Create a Windows 8 / 8.1 bootable USB

        Depending if you have the ISO image of Windows Vista or the original DVD, you can use Easy USB Creator 2.0 to create the USB if you have the ISO image or the diskpart utility to create the bootable USB, if you have the DVD.

        If you have the ISO image

        Using Easy USB Creator 2.0

        Easy USB Creator can quickly convert the ISO images into bootable USB drives, with just a single click:

        Easy USB Creator 2.0 screenshot

        Download Easy USB Creator 2.0

        To burn Windows 8 or 8.1 to a USB drive using Easy USB Creator 2.0, simply follow these steps:

        1. Download USB Creator 2.0
        2. Install Easy USB Creator 2.0
        3. Browse the Windows 8 or Windows 8.1 ISO Image to load at the ISO File field
        4. Select the destination of your USB Drive at the Destination Drive field
        5. Start

        Easy USB Creator 2.0 supports both USB 2.0 and USB 3.0.

        It’s compatible with Windows XP, Windows Vista, Windows 7, Windows 8, Windows 8.1, Windows 10 plus the Windows Server editions (2003, 2008, 2012). You must have .NET Framework 2.0 or higher in order to use Easy USB Creator 2.0

        Using Windows 7 USB/DVD Download Tool

        The Windows 7 USB/DVD Download Tool is available to download and you can use it to create a bootable ISO image from the ISO image you purchased and downloaded from Microsoft.

        While the name is “Windows 7”, you can use this tool on a Windows 8 or 8.1 system too.

        Before you continue with these instructions, please make sure that:

        The instructions are:

        1. Launch the Windows 7 USB/DVD Download Tool
        2. At the Source File field, click Browse and find the Windows 8 or 8.1 ISO image on your computer
          Windows 7 USB/DVD Download Tool: Source File

          Windows 7 USB/DVD Download Tool: Source File

        3. Click Next
        4. Insert the USB flash drive in an available port on your computer. Make sure it’s loaded in My Computer.
        5. At Step 2, select USB Device to write the ISO image to the USB drive. You can click DVD to write the ISO image to a DVD instead.
          Windows 7 USB/DVD Download Tool: Choose Media Type

          Windows 7 USB/DVD Download Tool: Choose Media Type

        6. At Step 3, select the USB flash drive from the drop down menu. If the drive isn’t loaded yet, you can click on the Refresh icon next to the drop down menu.
        7. Click Begin copying
        8. When done, exit the Windows 7 USB/DVD Download Tool
          Windows 7 USB/DVD Download Tool: Done

          Windows 7 USB/DVD Download Tool: Done

        If you have the installation disc (DVD)

        If you have the original installation disc (DVD) of Microsoft Windows 8 or Windows 8.1 you can create a bootable USB drive.

        To do so, follow the steps below:

        1. Boot into Windows 8 or 8.1
        2. Open Command Prompt as Administrator. To do so, press the and key to search for. From the search results list, right-click on Command Prompt
        3. Click Run as administrator
        4. Enter the password, when prompted
        5. When Command Prompt opens, type this command and press : diskpart
        6. Insert the USB flash drive in the port
        7. Typepress
          Command Prompt: list disk

          Command Prompt: list disk

        8. Identify the number next of the USB drive in the list provided by the list disk command
        9. Typepress. Replace with the number of the USB drive listed from above steps.
          Command Prompt: select disk

          Command Prompt: select disk

          The confirmation message should be:

          Disk 1 is now the selected disk.
        10. Typepress
        11. Typepress
        12. Typepress
        13. Typepress
        14. Typepress. To have the USB drive formatted more quickly, add the quick parameter:
        15. Typepress
        16. Typepress
        17. Copy the contents of the Windows 8 DVD or 8.1 DVD to the USB flash drive

        Create a Windows 10 bootable USB

        If you have the ISO image

        Using Easy USB Creator 2.0

        Easy USB Creator can quickly convert the ISO images into bootable USB drives, with just a single click:

        easyusb_win10internet explorer for windows 10 - Crack Key For U height="217">

        Download Easy USB Creator 2.0

        To burn Windows 10 to a USB drive using Easy USB Creator 2.0, simply follow these steps:

        1. Download USB Creator 2.0
        2. Install Easy USB Creator 2.0
        3. Browse the Windows 10 ISO Image to load at the ISO File field
        4. Select the destination of your USB Drive at the Destination Drive field
        5. Start

        Easy USB Creator 2.0 supports both USB 2.0 and USB 3.0.

        It’s compatible with Windows XP, Windows Vista, Windows 7, Windows 8, Windows 8.1, Windows 10 plus the Windows Server editions (2003, 2008, 2012). You must have .NET Framework 2.0 or higher in order to use Easy USB Creator 2.0

        Using Windows 7 USB/DVD Download Tool

        The Windows 7 USB/DVD Download Tool is available to download and you can use it to create a bootable ISO image from the ISO image you purchased and downloaded from Microsoft.

        While the name is “Windows 7”, you can use this tool on a Windows 10 system too.

        Before you continue with these instructions, please make sure that:

        The instructions are:

        1. Launch the Windows 7 USB/DVD Download Tool
        2. At the Source File field, click Browse and find the Windows 10 ISO image on your computer
          Windows 7 USB/DVD Download Tool: Source File

          Windows 7 USB/DVD Download Tool: Source File

        3. Click Next
        4. Insert the USB flash drive in an available port on your computer. Make sure it’s loaded in My Computer.
        5. At Step 2, select USB Device to write the ISO image to the USB drive. You can click DVD to write the ISO image to a DVD instead.
          Windows 7 USB/DVD Download Tool: Choose Media Type

          Windows 7 USB/DVD Download Tool: Choose Media Type

        6. At Step 3, select the USB flash drive from the drop down menu. If the drive isn’t loaded yet, you can click on the Refresh icon next to the drop down menu.
        7. Click Begin copying
        8. When done, exit the Windows 7 USB/DVD Download Tool
          Windows 7 USB/DVD Download Tool: Done

          Windows 7 USB/DVD Download Tool: Done

        If you have the installation disc (DVD)

        If you have the original installation disc (DVD) of Microsoft Windows 10 you can create a bootable USB drive.

        To do so, follow the steps below:

        1. Boot into Windows 10
        2. Open Command Prompt as Administrator. To do so, press the and key to search for. From the search results list, right-click on Command Promptcmd
        3. Click Run as administrator
        4. Enter the password, when prompted
        5. When Command Prompt opens, type this command and press : diskpart
        6. Insert the USB flash drive in the port
        7. Typepress
          Command Prompt: list disk

          Command Prompt: list disk

        8. Identify the number next of the USB drive in the list provided by the list disk command
        9. Typepress. Replace with the number of the USB drive listed from above steps.
          Command Prompt: select disk

          Command Prompt: select disk

          The confirmation message should be:

          Disk 1 is now the selected disk.
        10. Typepress
        11. Typepress
        12. Typepress
        13. Typepress
        14. Typepress. To have the USB drive formatted more quickly, add the quick parameter:
        15. Typepress
        16. Typepress
        17. Copy the contents of the Windows 10 DVD to the USB flash drive

        Troubleshooting

        Setup cannot find the End User Licensing Agreement (EULA)

        You may receive this error when trying to write a Windows (XP, Vista, 7, 8, 8.1) ISO Image to a USB drive and make it bootable:

        Setup cannot find the End User Licensing Agreement (EULA) Setup cannot continue. To Quit, Press F3

        If so, the ISO image might be corrupted. In this case, you can try:

        • download a new ISO image from Microsoft
        • use the original installation disc instead to create the bootable drive (instructions for using the disc instead of the ISO image are available in this guide for all Windows versions)
        • use Easy Recovery Essentials if you’re looking for accessing repair tools. Run EasyRE’s Automated Repair feature to automatically scan and fix various boot errors. Other features are available.

        Download Windows 7 USB/DVD Download Tool

        To download the Windows 7 USB/DVD Download Tool, go Windows PE (WinPE) Free Download for Windows 7/8/10 http://wudt.codeplex.com/.

        Bootable USB will not boot

        To make sure that the USB drive will boot when starting your computer, make sure that:

        If you created the bootable USB drive using the Windows 7 USB/DVD Download Tool, new computers with UEFI might not boot from the USB as it’s been formatted using NTFS and not FAT32.

        To get around this, follow these steps:

        1. After the Windows 7 USB/DVD Download Tool successfully created the bootable USB drive, go to My Computer and copy all contents from the USB drive to a folder on your Desktop
          Windows 7 USB/DVD Download Tool: Done

          Windows 7 USB/DVD Download Tool: Done

        2. Right-click on the USB Drive in My Computer and format it as FAT32
        3. After the format process is complete, copy all files from the folder you created on your Desktop back to the USB drive

        More Information

        Support Links

        Applicable Systems

        This Windows-related knowledgebase article applies to the following operating systems:

        • Windows XP (all editions)
        • Windows Vista (all editions)
        • Windows 7 (all editions)
        • Windows 8 (all editions)
        • Windows 8.1 (all editions)
        • Windows 10 (all editions)
        • Windows Server 2003 (all editions)
        • Windows Server 2008 (all editions)
        • Windows Server 2012 (all editions)

        Propose an edit

        Источник: https://neosmart.net/wiki/bootable-windows-usb/

        Lazesoft Recovery Suite

        Freeware

        Freeware programs can be downloaded used free of charge and without any time limitations. Freeware products can be used free of charge for both personal and professional (commercial use).

        Open Source

        Open Source software is software with source code that anyone can inspect, modify or enhance. Programs released under this license can be used at no cost for both personal and commercial purposes. There are many different open source licenses but they all must comply with the Open Source Windows PE (WinPE) Free Download for Windows 7/8/10 - in brief: the software can be freely used, modified and shared.

        Free to Play

        This license is commonly used for video games and it allows users to download and play the game for free. Basically, a Windows PE (WinPE) Free Download for Windows 7/8/10 is offered Free to Play (Freemium) and the user can decide if he wants to pay the money (Premium) for additional features, services, virtual or physical goods that expand the functionality of the game. In some cases, ads may be show to the users.

        Demo

        Demo programs have a limited functionality for free, but charge for an advanced set of features or for the removal of advertisements from the program's interfaces. In some cases, all the functionality is disabled until the license is purchased. Demos are usually not time-limited (like Trial software) but the functionality is limited.

        Trial

        Trial software allows the user to evaluate the software for a limited amount of time. After that trial period (usually 15 to 90 days) the user can decide whether to buy the software or not. Even though, most trial software products are only time-limited some also have feature limitations.

        Paid

        Usually commercial software or games are produced for sale or to serve a commercial purpose.

        Click here to close

        Источник: https://www.filehorse.com/download-lazesoft-recovery-suite/

        : Windows PE (WinPE) Free Download for Windows 7/8/10

        Easeus data recovery wizard free
        WATCH DOGS: LEGION CRACK LATEST GAME INCL TORRENT CPY [2021] DOWNLOAD
        FOLDER LOCK CODE - CRACK KEY FOR U

        You can watch a thematic video

        WinPE 10-8 Sergei Strelec 2021 Windows repair tools - All-In-One bootable rescue disc

        Notice: Undefined variable: z_bot in /sites/homeover.us/for-windows/windows-pe-winpe-free-download-for-windows-7810.php on line 115

        Notice: Undefined variable: z_empty in /sites/homeover.us/for-windows/windows-pe-winpe-free-download-for-windows-7810.php on line 115

        1 Replies to “Windows PE (WinPE) Free Download for Windows 7/8/10”

        Leave a Reply

        Your email address will not be published. Required fields are marked *